Complaints & Recalls
Official Safety Recalls - Important!
8 RecallsThese are official manufacturer recalls ordered by NHTSA for safety defects. If you own this vehicle, contact your dealer immediately for free repairs.
Chrysler (fca Us, Llc)
Safety Issue:
Chrysler (FCA US, LLC) is recalling certain 2025 Ram 1500 vehicles. A software error may cause an incorrect tire inflation pressure message to display on the instrument panel.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Mfg Campaign: 30C
Recall Date: Apr 10, 2025
Chrysler (fca Us, Llc)
Safety Issue:
Chrysler (FCA US, LLC) is recalling certain 2025 Ram 1500 pickup trucks. Incorrect headlight module software may cause the headlights to become inoperative. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Mfg Campaign: D4B
Recall Date: Dec 19, 2024
Chrysler (fca Us, Llc)
Safety Issue:
Chrysler (FCA US, LLC) is recalling certain 2025 Ram 1500 vehicles. The front wheel hub encoder rings may be damaged, which can disable the electronic stability control system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Mfg Campaign: 97B
Recall Date: Oct 24, 2024
Consumer Complaints
170 ComplaintsChrysler (fca Us, Llc)
Defect Description:
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
Potential Consequences:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Corrective Action:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Additional Notes:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Mfg Campaign: 11670343
Recall Date: Jun 30, 2025
Chrysler (fca Us, Llc)
Defect Description:
LANE DEPARTURE: BLIND SPOT DETECTION
Potential Consequences:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Corrective Action:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Additional Notes:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Mfg Campaign: 11670343
Recall Date: Jun 30, 2025
Chrysler (fca Us, Llc)
Defect Description:
FORWARD COLLISION AVOIDANCE: WARNINGS
Potential Consequences:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Corrective Action:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Additional Notes:
Multiple warning lights for “Automatic Emergency Braking Unavailable Service Required” along with “Blind Spot Unavailable Service Required” this truck required 4 (four) trips to the dealer to find a resolution. Parts took 50 days to arrive so had to disable these important safety systems and continue driving. Blind spot light on passenger side mirror goes off randomly in heavy rain even after this repair. So while driving in the rain, it’s unreliable. Over 30 other reports of all the above issues on the RAM-RHO forums.
Mfg Campaign: 11670343
Recall Date: Jun 30, 2025
Chrysler (fca Us, Llc)
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
I was parked and attempted to leave and put my truck on drive. The shifter known would not go into drive mode. I kept getting an error code to “Service Shifter” after multiple attempts the truck went inky drive mode and I drove home with the error code to “Service Shifter”. When I arrived home to back into my drive way, the truck would not go into reverse. I sat in the middle of the street for an hour before the shifter released into reverse with the same error code. I drove the truck to the dealership where it was purchased and was advised not to drive the truck due to the danger of the shifter and the truck could possibly stay on drive/reverse mode when driving. My truck had been at the dealership for 15 days and I have been told that the shifter has been replaced 3 times, and the electrical relay is not responding. I am told that the Ram specialists are trying to determine what the problem is and have been contacted and can connect to my trucks electrical system. I was told that a Transmission Control Module is being ordered for replacement. The Service Dept Manager stated that this is a new problem with the 2025 Dodge Ram and ALL the Ram Specialists are baffled.
Corrective Action:
I was parked and attempted to leave and put my truck on drive. The shifter known would not go into drive mode. I kept getting an error code to “Service Shifter” after multiple attempts the truck went inky drive mode and I drove home with the error code to “Service Shifter”. When I arrived home to back into my drive way, the truck would not go into reverse. I sat in the middle of the street for an hour before the shifter released into reverse with the same error code. I drove the truck to the dealership where it was purchased and was advised not to drive the truck due to the danger of the shifter and the truck could possibly stay on drive/reverse mode when driving. My truck had been at the dealership for 15 days and I have been told that the shifter has been replaced 3 times, and the electrical relay is not responding. I am told that the Ram specialists are trying to determine what the problem is and have been contacted and can connect to my trucks electrical system. I was told that a Transmission Control Module is being ordered for replacement. The Service Dept Manager stated that this is a new problem with the 2025 Dodge Ram and ALL the Ram Specialists are baffled.
Additional Notes:
I was parked and attempted to leave and put my truck on drive. The shifter known would not go into drive mode. I kept getting an error code to “Service Shifter” after multiple attempts the truck went inky drive mode and I drove home with the error code to “Service Shifter”. When I arrived home to back into my drive way, the truck would not go into reverse. I sat in the middle of the street for an hour before the shifter released into reverse with the same error code. I drove the truck to the dealership where it was purchased and was advised not to drive the truck due to the danger of the shifter and the truck could possibly stay on drive/reverse mode when driving. My truck had been at the dealership for 15 days and I have been told that the shifter has been replaced 3 times, and the electrical relay is not responding. I am told that the Ram specialists are trying to determine what the problem is and have been contacted and can connect to my trucks electrical system. I was told that a Transmission Control Module is being ordered for replacement. The Service Dept Manager stated that this is a new problem with the 2025 Dodge Ram and ALL the Ram Specialists are baffled.
Mfg Campaign: 11670038
Recall Date: Jun 29, 2025
Chrysler (fca Us, Llc)
Defect Description:
POWER TRAIN
Potential Consequences:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Corrective Action:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Additional Notes:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Mfg Campaign: 11669498
Recall Date: Jun 26, 2025
Chrysler (fca Us, Llc)
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Corrective Action:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Additional Notes:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Mfg Campaign: 11669498
Recall Date: Jun 26, 2025
Chrysler (fca Us, Llc)
Defect Description:
ENGINE
Potential Consequences:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Corrective Action:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Additional Notes:
I purchased this new vehicle on the morning of Saturday, June 14, 2025. At the time of purchase the vehicle had just 25 miles on it. The drive home from the dealership was about 87 miles. A few miles from home, the truck began to shake violently when the gas pedal was pressed. The engine or transmission light was on. The faster the truck went, the harder it would shake. The shaking stopped when there was no pressure on the gas pedal. The shaking was so severe that it was very difficult to drive over 30 mph. I called my salesman and he recommended that I try to “reset” the vehicle by stepping away from the vehicle so it cannot link with the FAB for 10-15 minutes. I did so and came back. The truck started fine but it was shaking while idling. There was no difference driving the truck after the “reset”. It would still shake severely when the gas pedal was pressed. We also discovered that the ring around the Start/Stop button was loose. A tow truck to picked up this vehicle on the same day it was purchased and towed it back to the dealership. The dealer had the truck from Saturday, June14, 2025 and they returned it on Wednesday, June 18, 2025, stating there was a "circuit pin" that was broken. The very next day on Thursday, June 19, 2025, the check engine light came on. Pressing the brake pedal made an odd sound, like bubbles or a gargling noise, even while idling. This noise was not there before. While driving the vehicle, the shaking was very mild but the truck shifted hard. Once, when I was accelerating, there was a loud “pop” that occurred in the truck. Immediately, the dash displayed “See User Manual for Proper Oil and Fuel” and it never went off. After the pop, the truck had a very hard time increasing speed. When I drove off from a stop sign or after I was stopped at a traffic light, the engine would rev high, 3000 – 5000 RPM, and the truck would not move for a few seconds. Then it would very slowly increase speed.
Mfg Campaign: 11669498
Recall Date: Jun 26, 2025
Chrysler (fca Us, Llc)
Defect Description:
VEHICLE SPEED CONTROL
Potential Consequences:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Corrective Action:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Additional Notes:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Mfg Campaign: 11668671
Recall Date: Jun 23, 2025
Chrysler (fca Us, Llc)
Defect Description:
FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL
Potential Consequences:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Corrective Action:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Additional Notes:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Mfg Campaign: 11668671
Recall Date: Jun 23, 2025
Chrysler (fca Us, Llc)
Defect Description:
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
Potential Consequences:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Corrective Action:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Additional Notes:
Adaptive cruise control does not work, Forward collision warning does not work, pedestrian emergency braking does not work, auto emergency braking does not work among other non safety issues. Dealer is aware and has ordered a new infotainment system which controls all these safety features but is unable to get it from the manufacturer for the last 6 months. This system did not work from the day I picked up the vehicle
Mfg Campaign: 11668671
Recall Date: Jun 23, 2025
Chrysler (fca Us, Llc)
Defect Description:
ENGINE
Potential Consequences:
At 1400 miles the truck was running and I put the truck in reverse and the engine light came on and the truck died. The truck started back up but the engine light stayed on. The engine light was for random cylinder Miss fire p0300. And about once a week of so the engine light will come on for a day is so and go off. Since this has happened the fuel milage has been affected. Also sometimes when truck drops into passing gear it will have loss of power and lights and bell will start flashing on the dash. And says high coolant temp and high engine temp even while being full of coolant.
Corrective Action:
At 1400 miles the truck was running and I put the truck in reverse and the engine light came on and the truck died. The truck started back up but the engine light stayed on. The engine light was for random cylinder Miss fire p0300. And about once a week of so the engine light will come on for a day is so and go off. Since this has happened the fuel milage has been affected. Also sometimes when truck drops into passing gear it will have loss of power and lights and bell will start flashing on the dash. And says high coolant temp and high engine temp even while being full of coolant.
Additional Notes:
At 1400 miles the truck was running and I put the truck in reverse and the engine light came on and the truck died. The truck started back up but the engine light stayed on. The engine light was for random cylinder Miss fire p0300. And about once a week of so the engine light will come on for a day is so and go off. Since this has happened the fuel milage has been affected. Also sometimes when truck drops into passing gear it will have loss of power and lights and bell will start flashing on the dash. And says high coolant temp and high engine temp even while being full of coolant.
Mfg Campaign: 11667726
Recall Date: Jun 18, 2025
Chrysler (fca Us, Llc)
Defect Description:
SERVICE BRAKES
Potential Consequences:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Corrective Action:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Additional Notes:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Mfg Campaign: 11666926
Recall Date: Jun 14, 2025
Chrysler (fca Us, Llc)
Defect Description:
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
Potential Consequences:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Corrective Action:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Additional Notes:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Mfg Campaign: 11666926
Recall Date: Jun 14, 2025
Chrysler (fca Us, Llc)
Defect Description:
FORWARD COLLISION AVOIDANCE: WARNINGS
Potential Consequences:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Corrective Action:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Additional Notes:
Since purchasing the vehicle in April, I have had a continuous problem with the brake's and brake system's. The red dash warning chime and red warning light have come on. I have brought the car in 4 times to the dealer for repair, to no avail. This happened before I put 100 miles on the car and has continued. I currently only have about 680 miles. The dealer has "worked" on on it for almost 2 months (bought the car 3 months ago). The following codes keep being set (scan attached). 2 Anti-Lock Brake System Code : C05D2-00 - Master Cylinder Piston Position Higher Than Expected. C0597-00 - Brake System Control Module 'A' Performance. 1 Instrument Panel Cluster Code: B12B7-92 - Instrument Panel Cluster Display. 1 Integrated Trailer Control Module Code: C10C7-00 - Electronic Trailer Brake Control Output.
Mfg Campaign: 11666926
Recall Date: Jun 14, 2025
Chrysler (fca Us, Llc)
Defect Description:
SERVICE BRAKES
Potential Consequences:
See attached document for complaint.
Corrective Action:
See attached document for complaint.
Additional Notes:
See attached document for complaint.
Mfg Campaign: 11666739
Recall Date: Jun 13, 2025
Chrysler (fca Us, Llc)
Defect Description:
ELECTRONIC STABILITY CONTROL (ESC)
Potential Consequences:
See attached document for complaint.
Corrective Action:
See attached document for complaint.
Additional Notes:
See attached document for complaint.
Mfg Campaign: 11666739
Recall Date: Jun 13, 2025
Chrysler (fca Us, Llc)
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
See attached document for complaint.
Corrective Action:
See attached document for complaint.
Additional Notes:
See attached document for complaint.
Mfg Campaign: 11666739
Recall Date: Jun 13, 2025
Chrysler (fca Us, Llc)
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2025 Ram 1500. The contact stated that the vehicle had been experiencing difficulty starting. The contact stated that the vehicle was able to restart after several attempts. The vehicle was taken to the dealer, where the failure could not be duplicated; however, the failure recurred. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 6,000.
Corrective Action:
The contact owns a 2025 Ram 1500. The contact stated that the vehicle had been experiencing difficulty starting. The contact stated that the vehicle was able to restart after several attempts. The vehicle was taken to the dealer, where the failure could not be duplicated; however, the failure recurred. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 6,000.
Additional Notes:
The contact owns a 2025 Ram 1500. The contact stated that the vehicle had been experiencing difficulty starting. The contact stated that the vehicle was able to restart after several attempts. The vehicle was taken to the dealer, where the failure could not be duplicated; however, the failure recurred. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 6,000.
Mfg Campaign: 11666513
Recall Date: Jun 12, 2025
Chrysler (fca Us, Llc)
Defect Description:
ENGINE
Potential Consequences:
The contact owns a 2025 Ram 1500. The contact stated that the vehicle had been experiencing difficulty starting. The contact stated that the vehicle was able to restart after several attempts. The vehicle was taken to the dealer, where the failure could not be duplicated; however, the failure recurred. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 6,000.
Corrective Action:
The contact owns a 2025 Ram 1500. The contact stated that the vehicle had been experiencing difficulty starting. The contact stated that the vehicle was able to restart after several attempts. The vehicle was taken to the dealer, where the failure could not be duplicated; however, the failure recurred. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 6,000.
Additional Notes:
The contact owns a 2025 Ram 1500. The contact stated that the vehicle had been experiencing difficulty starting. The contact stated that the vehicle was able to restart after several attempts. The vehicle was taken to the dealer, where the failure could not be duplicated; however, the failure recurred. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 6,000.
Mfg Campaign: 11666513
Recall Date: Jun 12, 2025
Chrysler (fca Us, Llc)
Defect Description:
POWER TRAIN
Potential Consequences:
The contact owns a 2025 Ram 1500. The contact stated while driving at an undisclosed speed, the engine warning light illuminated. The contact stated that the failure occurred six days after the vehicle was purchased. The vehicle was taken to the dealer where it was diagnosed with multi-engine misfire, DTC: P0300. The contact was informed that a software update was needed. The vehicle was repaired. In addition, the contact stated the software had been updated twice; however, the contact was informed that the software update was a temporary fix. The contact stated that the failure reoccurred. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The dealer declined to update the software another time. Additionally, the dealer declined to buy back the vehicle. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 487.
Corrective Action:
The contact owns a 2025 Ram 1500. The contact stated while driving at an undisclosed speed, the engine warning light illuminated. The contact stated that the failure occurred six days after the vehicle was purchased. The vehicle was taken to the dealer where it was diagnosed with multi-engine misfire, DTC: P0300. The contact was informed that a software update was needed. The vehicle was repaired. In addition, the contact stated the software had been updated twice; however, the contact was informed that the software update was a temporary fix. The contact stated that the failure reoccurred. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The dealer declined to update the software another time. Additionally, the dealer declined to buy back the vehicle. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 487.
Additional Notes:
The contact owns a 2025 Ram 1500. The contact stated while driving at an undisclosed speed, the engine warning light illuminated. The contact stated that the failure occurred six days after the vehicle was purchased. The vehicle was taken to the dealer where it was diagnosed with multi-engine misfire, DTC: P0300. The contact was informed that a software update was needed. The vehicle was repaired. In addition, the contact stated the software had been updated twice; however, the contact was informed that the software update was a temporary fix. The contact stated that the failure reoccurred. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The dealer declined to update the software another time. Additionally, the dealer declined to buy back the vehicle. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 487.
Mfg Campaign: 11666118
Recall Date: Jun 10, 2025
Need Legal Help?
Featured Attorneys
Barry Edzant
Edzant Price LLC
Valencia, CA • 36 yrs
Focus: Lemon Law, Personal Injury