Complaints & Recalls
Official Safety Recalls - Important!
6 RecallsThese are official manufacturer recalls ordered by NHTSA for safety defects. If you own this vehicle, contact your dealer immediately for free repairs.
Mazda North American Operations
Safety Issue:
Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 6023G
Recall Date: Jul 14, 2023
Mazda North American Operations
Safety Issue:
Mazda North American Operations (Mazda) is recalling certain 2016-2018 Mazda3 vehicles. A defective windshield wiper relay may cause the windshield wipers to become inoperative, reducing the driver's visibility.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: 3219D
Recall Date: Apr 4, 2019
Mazda North American Operations
Safety Issue:
Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda6 and 2014-2016 Mazda3 vehicles. Water could possibly enter the brake caliper causing the parking brake actuator shaft to corrode and possibly bind.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: 1217F
Recall Date: Jun 22, 2017
Mazda North American Operations
Safety Issue:
Mazda North American Operations (Mazda) is recalling certain model year 2016 Mazda3 vehicles manufactured September 24, 2015, to October 16, 2015. During manufacturing, the fuel tanks for the affected vehicles may have deformed, resulting in a fuel leak from the recirculation pipe welded connection.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: 0216I
Recall Date: Sep 23, 2016
Mazda North American Operations
Safety Issue:
Mazda Motors North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda3 vehicles manufactured January 4, 2014, to September 18, 2015. The fuel tank of the affected vehicles may have been improperly handled during manufacturing and, as a result, the welded attachment of the Inlet Check Valve (ICV) may fail and allow fuel to leak.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: 0116I
Recall Date: Sep 22, 2016
Mazda North American Operations
Safety Issue:
Mazda North American Operations (Mazda) is recalling certain model year 2015-2016 Mazda3 vehicles manufactured May 21, 2015, to August 25, 2015. The affected vehicles are equipped with a fuel tank with a shut-off valve that can allow fuel to enter into the fuel tank emissions systems. If enough fuel enters the emission system it may leak out onto the ground or result in an engine stall.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: 8615J
Recall Date: Oct 2, 2015
Consumer Complaints
133 ComplaintsMazda Motor Corp.
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The backup camera is flickering and with distorted image. I called customer service but didn't provide information or solution of how to solve the issue even though they were aware of it.
Corrective Action:
The backup camera is flickering and with distorted image. I called customer service but didn't provide information or solution of how to solve the issue even though they were aware of it.
Additional Notes:
The backup camera is flickering and with distorted image. I called customer service but didn't provide information or solution of how to solve the issue even though they were aware of it.
Mfg Campaign: 11544146
Recall Date: Sep 12, 2023
Mazda Motor Corp.
Defect Description:
FUEL/PROPULSION SYSTEM
Potential Consequences:
Recently noticed the odor of unburned gasoline, both inside and outside the vehicle. When driving, the ventilation system would flush this away in a few moments, but this phenomenon is new within the past few weeks. Our mechanic (not the dealer) traced the issue to the fuel tank, where the port for the fuel pump and sensors is located on top. This area is accessible by removing the rear seat cushion and a cover plate. He showed me how the fuel pump and sensor module has rusted to the thread of the port, preventing removal of the assembly, and that the port flange itself has rusted and has pin-holes, allowing vapor to escape. He was able to put slight positive air pressure to the tank as a test, and was able to cause liquid fuel to escape from the holes. The tank was about 3/4 full at the time. This seems like a serious safety issue. The port and matching threaded parts (fuel pump / sensor module) that inserts there should be corrosion-proof. I can provide a photo of the affected area if needed; I would get the image file from my mechanic.
Corrective Action:
Recently noticed the odor of unburned gasoline, both inside and outside the vehicle. When driving, the ventilation system would flush this away in a few moments, but this phenomenon is new within the past few weeks. Our mechanic (not the dealer) traced the issue to the fuel tank, where the port for the fuel pump and sensors is located on top. This area is accessible by removing the rear seat cushion and a cover plate. He showed me how the fuel pump and sensor module has rusted to the thread of the port, preventing removal of the assembly, and that the port flange itself has rusted and has pin-holes, allowing vapor to escape. He was able to put slight positive air pressure to the tank as a test, and was able to cause liquid fuel to escape from the holes. The tank was about 3/4 full at the time. This seems like a serious safety issue. The port and matching threaded parts (fuel pump / sensor module) that inserts there should be corrosion-proof. I can provide a photo of the affected area if needed; I would get the image file from my mechanic.
Additional Notes:
Recently noticed the odor of unburned gasoline, both inside and outside the vehicle. When driving, the ventilation system would flush this away in a few moments, but this phenomenon is new within the past few weeks. Our mechanic (not the dealer) traced the issue to the fuel tank, where the port for the fuel pump and sensors is located on top. This area is accessible by removing the rear seat cushion and a cover plate. He showed me how the fuel pump and sensor module has rusted to the thread of the port, preventing removal of the assembly, and that the port flange itself has rusted and has pin-holes, allowing vapor to escape. He was able to put slight positive air pressure to the tank as a test, and was able to cause liquid fuel to escape from the holes. The tank was about 3/4 full at the time. This seems like a serious safety issue. The port and matching threaded parts (fuel pump / sensor module) that inserts there should be corrosion-proof. I can provide a photo of the affected area if needed; I would get the image file from my mechanic.
Mfg Campaign: 11540753
Recall Date: Aug 25, 2023
Mazda Motor Corp.
Defect Description:
UNKNOWN OR OTHER
Potential Consequences:
ac/heat knob will not go into max air due to a cable slipping off the mechanism behind the dash when it does this the heat will not work and it is hard to defrost your windows if they get fogged up while driving making it difficult to see
Corrective Action:
ac/heat knob will not go into max air due to a cable slipping off the mechanism behind the dash when it does this the heat will not work and it is hard to defrost your windows if they get fogged up while driving making it difficult to see
Additional Notes:
ac/heat knob will not go into max air due to a cable slipping off the mechanism behind the dash when it does this the heat will not work and it is hard to defrost your windows if they get fogged up while driving making it difficult to see
Mfg Campaign: 11537821
Recall Date: Aug 11, 2023
Mazda Motor Corp.
Defect Description:
Chest Clip, Buckle, Harness
Potential Consequences:
When cleaning and adjusting the seat to move it to forward-facing, we discovered that two of the child harness straps (the crotch strap and one of the shoulder straps) had significant grooves cut into them, presumably by the plastic edges of the base. Given that this damage was not visible before moving the cover and adjusting the seat, and given that Graco advertises this seat as rear-facing from 4 to 50 pounds and forward-facing up to 65 pounds, a consumer wouldn't see or have any reason to expect this level of damage after about 3.5 years of use. I have to assume that this sort of severe wear compromises the strength of the straps and thus the safety of the seat if there were an accident (thank goodness we didn't have one). I have the seat still, and I contacted the manufacturer with pictures of the damage, and they did not seem to think it was out of the ordinary or alarming at all, just told me that they could send me a rebate for a discount on a new seat if I wanted since this one was out of warranty. I cannot believe that this is an acceptable and safe amount of normal wear. I can attest that we followed manufacturer instructions for care and install and did not use any cleaning products on the seat, submerge the seat, leave it outside, or do anything else that I can think of that would have constituted inappropriate care of the seat.
Corrective Action:
When cleaning and adjusting the seat to move it to forward-facing, we discovered that two of the child harness straps (the crotch strap and one of the shoulder straps) had significant grooves cut into them, presumably by the plastic edges of the base. Given that this damage was not visible before moving the cover and adjusting the seat, and given that Graco advertises this seat as rear-facing from 4 to 50 pounds and forward-facing up to 65 pounds, a consumer wouldn't see or have any reason to expect this level of damage after about 3.5 years of use. I have to assume that this sort of severe wear compromises the strength of the straps and thus the safety of the seat if there were an accident (thank goodness we didn't have one). I have the seat still, and I contacted the manufacturer with pictures of the damage, and they did not seem to think it was out of the ordinary or alarming at all, just told me that they could send me a rebate for a discount on a new seat if I wanted since this one was out of warranty. I cannot believe that this is an acceptable and safe amount of normal wear. I can attest that we followed manufacturer instructions for care and install and did not use any cleaning products on the seat, submerge the seat, leave it outside, or do anything else that I can think of that would have constituted inappropriate care of the seat.
Additional Notes:
When cleaning and adjusting the seat to move it to forward-facing, we discovered that two of the child harness straps (the crotch strap and one of the shoulder straps) had significant grooves cut into them, presumably by the plastic edges of the base. Given that this damage was not visible before moving the cover and adjusting the seat, and given that Graco advertises this seat as rear-facing from 4 to 50 pounds and forward-facing up to 65 pounds, a consumer wouldn't see or have any reason to expect this level of damage after about 3.5 years of use. I have to assume that this sort of severe wear compromises the strength of the straps and thus the safety of the seat if there were an accident (thank goodness we didn't have one). I have the seat still, and I contacted the manufacturer with pictures of the damage, and they did not seem to think it was out of the ordinary or alarming at all, just told me that they could send me a rebate for a discount on a new seat if I wanted since this one was out of warranty. I cannot believe that this is an acceptable and safe amount of normal wear. I can attest that we followed manufacturer instructions for care and install and did not use any cleaning products on the seat, submerge the seat, leave it outside, or do anything else that I can think of that would have constituted inappropriate care of the seat.
Mfg Campaign: 11533109
Recall Date: Jul 18, 2023
Mazda Motor Corp.
Defect Description:
SUSPENSION
Potential Consequences:
shock towers are disintegrating so the shocks would not be connected to anything.
Corrective Action:
shock towers are disintegrating so the shocks would not be connected to anything.
Additional Notes:
shock towers are disintegrating so the shocks would not be connected to anything.
Mfg Campaign: 11529819
Recall Date: Jun 30, 2023
Mazda Motor Corp.
Defect Description:
AIR BAGS
Potential Consequences:
Nothing has happened yet but Ive done a bunch of research and a lot of the 3rd generation Mazda 3's all have the same airbag code 16 flashing on their dash and it's not on any recall list
Corrective Action:
Nothing has happened yet but Ive done a bunch of research and a lot of the 3rd generation Mazda 3's all have the same airbag code 16 flashing on their dash and it's not on any recall list
Additional Notes:
Nothing has happened yet but Ive done a bunch of research and a lot of the 3rd generation Mazda 3's all have the same airbag code 16 flashing on their dash and it's not on any recall list
Mfg Campaign: 11503213
Recall Date: Jan 23, 2023
Mazda Motor Corp.
Defect Description:
SEATS
Potential Consequences:
Nothing has happened yet but Ive done a bunch of research and a lot of the 3rd generation Mazda 3's all have the same airbag code 16 flashing on their dash and it's not on any recall list
Corrective Action:
Nothing has happened yet but Ive done a bunch of research and a lot of the 3rd generation Mazda 3's all have the same airbag code 16 flashing on their dash and it's not on any recall list
Additional Notes:
Nothing has happened yet but Ive done a bunch of research and a lot of the 3rd generation Mazda 3's all have the same airbag code 16 flashing on their dash and it's not on any recall list
Mfg Campaign: 11503213
Recall Date: Jan 23, 2023
Mazda Motor Corp.
Defect Description:
UNKNOWN OR OTHER
Potential Consequences:
The rear backup camera on my vehicle goes on and off or dims considerably when I back up, not allowing me to see cars and people potentially behind me. This is associated, I believe, with an issue with the screen and infotainment system of the car, which I had checked out on 9/24/21 at a Mazda dealership. The screen goes on and off constantly, not allowing me to use the radio, bluetooth, etc. They said it is a chip issue that they have seen in many other Mazda 3's from 2016. Not being able to listen to the radio is one thing, but having the backup camera not work or work improperly is a safety issue.
Corrective Action:
The rear backup camera on my vehicle goes on and off or dims considerably when I back up, not allowing me to see cars and people potentially behind me. This is associated, I believe, with an issue with the screen and infotainment system of the car, which I had checked out on 9/24/21 at a Mazda dealership. The screen goes on and off constantly, not allowing me to use the radio, bluetooth, etc. They said it is a chip issue that they have seen in many other Mazda 3's from 2016. Not being able to listen to the radio is one thing, but having the backup camera not work or work improperly is a safety issue.
Additional Notes:
The rear backup camera on my vehicle goes on and off or dims considerably when I back up, not allowing me to see cars and people potentially behind me. This is associated, I believe, with an issue with the screen and infotainment system of the car, which I had checked out on 9/24/21 at a Mazda dealership. The screen goes on and off constantly, not allowing me to use the radio, bluetooth, etc. They said it is a chip issue that they have seen in many other Mazda 3's from 2016. Not being able to listen to the radio is one thing, but having the backup camera not work or work improperly is a safety issue.
Mfg Campaign: 11484177
Recall Date: Sep 13, 2022
Mazda Motor Corp.
Defect Description:
SEAT BELTS
Potential Consequences:
Apparently all of sudden the front occupants seat belt had lock and malfunctioning to the point you are unable to pull the belt strap to securely wrapped around the passenger, took it to have it evaluated at the request of the auto maker, supposedly this what I understood from two separate auto repair shops ( Mazda) dealership and a reliable auto repair (Apex) shop stating that a spring loaded system mechanism part was actually missing and that the standard mechanical labor (code) cost for the repair were not (unknown) listed while the other suggested the whole seat belt needed to be replaced I strongly feel this should be a safety related issue for both the driver and passenger seat belts should be recalled and carefully looked into for driver/passenger safety reasons.
Corrective Action:
Apparently all of sudden the front occupants seat belt had lock and malfunctioning to the point you are unable to pull the belt strap to securely wrapped around the passenger, took it to have it evaluated at the request of the auto maker, supposedly this what I understood from two separate auto repair shops ( Mazda) dealership and a reliable auto repair (Apex) shop stating that a spring loaded system mechanism part was actually missing and that the standard mechanical labor (code) cost for the repair were not (unknown) listed while the other suggested the whole seat belt needed to be replaced I strongly feel this should be a safety related issue for both the driver and passenger seat belts should be recalled and carefully looked into for driver/passenger safety reasons.
Additional Notes:
Apparently all of sudden the front occupants seat belt had lock and malfunctioning to the point you are unable to pull the belt strap to securely wrapped around the passenger, took it to have it evaluated at the request of the auto maker, supposedly this what I understood from two separate auto repair shops ( Mazda) dealership and a reliable auto repair (Apex) shop stating that a spring loaded system mechanism part was actually missing and that the standard mechanical labor (code) cost for the repair were not (unknown) listed while the other suggested the whole seat belt needed to be replaced I strongly feel this should be a safety related issue for both the driver and passenger seat belts should be recalled and carefully looked into for driver/passenger safety reasons.
Mfg Campaign: 11448549
Recall Date: Jan 23, 2022
Mazda Motor Corp.
Defect Description:
SEAT BELTS:FRONT:RETRACTOR
Potential Consequences:
Apparently all of sudden the front occupants seat belt had lock and malfunctioning to the point you are unable to pull the belt strap to securely wrapped around the passenger, took it to have it evaluated at the request of the auto maker, supposedly this what I understood from two separate auto repair shops ( Mazda) dealership and a reliable auto repair (Apex) shop stating that a spring loaded system mechanism part was actually missing and that the standard mechanical labor (code) cost for the repair were not (unknown) listed while the other suggested the whole seat belt needed to be replaced I strongly feel this should be a safety related issue for both the driver and passenger seat belts should be recalled and carefully looked into for driver/passenger safety reasons.
Corrective Action:
Apparently all of sudden the front occupants seat belt had lock and malfunctioning to the point you are unable to pull the belt strap to securely wrapped around the passenger, took it to have it evaluated at the request of the auto maker, supposedly this what I understood from two separate auto repair shops ( Mazda) dealership and a reliable auto repair (Apex) shop stating that a spring loaded system mechanism part was actually missing and that the standard mechanical labor (code) cost for the repair were not (unknown) listed while the other suggested the whole seat belt needed to be replaced I strongly feel this should be a safety related issue for both the driver and passenger seat belts should be recalled and carefully looked into for driver/passenger safety reasons.
Additional Notes:
Apparently all of sudden the front occupants seat belt had lock and malfunctioning to the point you are unable to pull the belt strap to securely wrapped around the passenger, took it to have it evaluated at the request of the auto maker, supposedly this what I understood from two separate auto repair shops ( Mazda) dealership and a reliable auto repair (Apex) shop stating that a spring loaded system mechanism part was actually missing and that the standard mechanical labor (code) cost for the repair were not (unknown) listed while the other suggested the whole seat belt needed to be replaced I strongly feel this should be a safety related issue for both the driver and passenger seat belts should be recalled and carefully looked into for driver/passenger safety reasons.
Mfg Campaign: 11448549
Recall Date: Jan 23, 2022
Mazda Motor Corp.
Defect Description:
UNKNOWN OR OTHER
Potential Consequences:
There is a main board failure that controls the information screen and back up camera The part number is TC3M-66-9C0B . The screen will keep rebooting not allowing the back up camera to work. According to Mazda dealer personal Mazda will not cover this. This is know to be a regular problem with many of these cars
Corrective Action:
There is a main board failure that controls the information screen and back up camera The part number is TC3M-66-9C0B . The screen will keep rebooting not allowing the back up camera to work. According to Mazda dealer personal Mazda will not cover this. This is know to be a regular problem with many of these cars
Additional Notes:
There is a main board failure that controls the information screen and back up camera The part number is TC3M-66-9C0B . The screen will keep rebooting not allowing the back up camera to work. According to Mazda dealer personal Mazda will not cover this. This is know to be a regular problem with many of these cars
Mfg Campaign: 11447668
Recall Date: Jan 16, 2022
Mazda Motor Corp.
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
I have had to replace the battery on this vehicle three times in the last year. I have taken it to Mazda who replaces the battery. No excessive electrical power is being used with in the car. The car is driven regularly as well.
Corrective Action:
I have had to replace the battery on this vehicle three times in the last year. I have taken it to Mazda who replaces the battery. No excessive electrical power is being used with in the car. The car is driven regularly as well.
Additional Notes:
I have had to replace the battery on this vehicle three times in the last year. I have taken it to Mazda who replaces the battery. No excessive electrical power is being used with in the car. The car is driven regularly as well.
Mfg Campaign: 11444914
Recall Date: Dec 24, 2021
Mazda Motor Corp.
Defect Description:
UNKNOWN OR OTHER
Potential Consequences:
I have had to replace the battery on this vehicle three times in the last year. I have taken it to Mazda who replaces the battery. No excessive electrical power is being used with in the car. The car is driven regularly as well.
Corrective Action:
I have had to replace the battery on this vehicle three times in the last year. I have taken it to Mazda who replaces the battery. No excessive electrical power is being used with in the car. The car is driven regularly as well.
Additional Notes:
I have had to replace the battery on this vehicle three times in the last year. I have taken it to Mazda who replaces the battery. No excessive electrical power is being used with in the car. The car is driven regularly as well.
Mfg Campaign: 11444914
Recall Date: Dec 24, 2021
Mazda Motor Corp.
Defect Description:
SERVICE BRAKES
Potential Consequences:
Parking brake does not fully disengage. This causes the rear brakes to wear prematurely and also has the potential to generate excessive heat.
Corrective Action:
Parking brake does not fully disengage. This causes the rear brakes to wear prematurely and also has the potential to generate excessive heat.
Additional Notes:
Parking brake does not fully disengage. This causes the rear brakes to wear prematurely and also has the potential to generate excessive heat.
Mfg Campaign: 11444337
Recall Date: Dec 19, 2021
Mazda Motor Corp.
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
In mid-2021, the Mazda Connect infotainment system suddenly stopped working. Upon starting the car, the software boots over and over again. The Bluetooth is inoperable; radio plays but I cannot change stations; steering wheel functionality of these features is absent; backup camera is intermittent and dimmer. The latter is a safety issue. The Mazda dealer diagnosed a malfunction of the connectivity master unit (CMU) and said they have had a rash of the same problem with 2016's recently.
Corrective Action:
In mid-2021, the Mazda Connect infotainment system suddenly stopped working. Upon starting the car, the software boots over and over again. The Bluetooth is inoperable; radio plays but I cannot change stations; steering wheel functionality of these features is absent; backup camera is intermittent and dimmer. The latter is a safety issue. The Mazda dealer diagnosed a malfunction of the connectivity master unit (CMU) and said they have had a rash of the same problem with 2016's recently.
Additional Notes:
In mid-2021, the Mazda Connect infotainment system suddenly stopped working. Upon starting the car, the software boots over and over again. The Bluetooth is inoperable; radio plays but I cannot change stations; steering wheel functionality of these features is absent; backup camera is intermittent and dimmer. The latter is a safety issue. The Mazda dealer diagnosed a malfunction of the connectivity master unit (CMU) and said they have had a rash of the same problem with 2016's recently.
Mfg Campaign: 11435057
Recall Date: Sep 30, 2021
Mazda Motor Corp.
Defect Description:
POWER TRAIN
Potential Consequences:
Timing cover leak, all maintenance was completed before the service bulletin. This is a TSB but should be a recall for how common this issue is as they stated it could be caused from the assembly line during a pressurized test. “ This may be caused by oil escaping from a fine clearance created at the sealant applied to joint (A)between the cylinder block (B) and head (C) when the engine was pressurized during leak testing on the engine assembly line.” TSB Bulletin No.: 01-018/18. Timing cover issues are not something that should be happening under 100k miles.
Corrective Action:
Timing cover leak, all maintenance was completed before the service bulletin. This is a TSB but should be a recall for how common this issue is as they stated it could be caused from the assembly line during a pressurized test. “ This may be caused by oil escaping from a fine clearance created at the sealant applied to joint (A)between the cylinder block (B) and head (C) when the engine was pressurized during leak testing on the engine assembly line.” TSB Bulletin No.: 01-018/18. Timing cover issues are not something that should be happening under 100k miles.
Additional Notes:
Timing cover leak, all maintenance was completed before the service bulletin. This is a TSB but should be a recall for how common this issue is as they stated it could be caused from the assembly line during a pressurized test. “ This may be caused by oil escaping from a fine clearance created at the sealant applied to joint (A)between the cylinder block (B) and head (C) when the engine was pressurized during leak testing on the engine assembly line.” TSB Bulletin No.: 01-018/18. Timing cover issues are not something that should be happening under 100k miles.
Mfg Campaign: 11434757
Recall Date: Sep 28, 2021
Mazda Motor Corp.
Defect Description:
ENGINE
Potential Consequences:
Timing cover leak, all maintenance was completed before the service bulletin. This is a TSB but should be a recall for how common this issue is as they stated it could be caused from the assembly line during a pressurized test. “ This may be caused by oil escaping from a fine clearance created at the sealant applied to joint (A)between the cylinder block (B) and head (C) when the engine was pressurized during leak testing on the engine assembly line.” TSB Bulletin No.: 01-018/18. Timing cover issues are not something that should be happening under 100k miles.
Corrective Action:
Timing cover leak, all maintenance was completed before the service bulletin. This is a TSB but should be a recall for how common this issue is as they stated it could be caused from the assembly line during a pressurized test. “ This may be caused by oil escaping from a fine clearance created at the sealant applied to joint (A)between the cylinder block (B) and head (C) when the engine was pressurized during leak testing on the engine assembly line.” TSB Bulletin No.: 01-018/18. Timing cover issues are not something that should be happening under 100k miles.
Additional Notes:
Timing cover leak, all maintenance was completed before the service bulletin. This is a TSB but should be a recall for how common this issue is as they stated it could be caused from the assembly line during a pressurized test. “ This may be caused by oil escaping from a fine clearance created at the sealant applied to joint (A)between the cylinder block (B) and head (C) when the engine was pressurized during leak testing on the engine assembly line.” TSB Bulletin No.: 01-018/18. Timing cover issues are not something that should be happening under 100k miles.
Mfg Campaign: 11434757
Recall Date: Sep 28, 2021
Mazda Motor Corp.
Defect Description:
FUEL/PROPULSION SYSTEM
Potential Consequences:
Front end passages side shaking with 60 mhg. And some time smelling gasoline when first started up my car.
Corrective Action:
Front end passages side shaking with 60 mhg. And some time smelling gasoline when first started up my car.
Additional Notes:
Front end passages side shaking with 60 mhg. And some time smelling gasoline when first started up my car.
Mfg Campaign: 11433978
Recall Date: Sep 22, 2021
Mazda Motor Corp.
Defect Description:
SUSPENSION
Potential Consequences:
Front end passages side shaking with 60 mhg. And some time smelling gasoline when first started up my car.
Corrective Action:
Front end passages side shaking with 60 mhg. And some time smelling gasoline when first started up my car.
Additional Notes:
Front end passages side shaking with 60 mhg. And some time smelling gasoline when first started up my car.
Mfg Campaign: 11433978
Recall Date: Sep 22, 2021
Mazda Motor Corp.
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The infotainment system fails to work - it is where I can access information re: maintenance schedule, or any info that is associated with a lit engine light. In addition the charging system for my mobile phone has ceased working. This includes both the usb ports and the lighter port which can be adapted with a charger that works in that receptable. These are all safety issues as far as I am concerned. Not having information related to the vehicle engine light is a big issue, but so is the fact that I can't charge my phone on long distance drives. If I needed assistance, I would be unable to contact anyone without a working cell phone. Because the display also controls the ability to pair a phone with blue tooth, there is concern for other drivers of the Mazda 3 (mine is a 2016) will be using the phone regardless of the bluetooth malfunction. I have seen a safety recall on other Mazda's with relation to the infotainment screen, but I do not see one here. I wonder why? To repair this crucial component would cost many hundreds of dollars -- something I am not in a position to do. Mazda claims this infotainment center is not under warranty, but with so much important information and safety features embedded into it, I think it should be corrected by recall. Thank you for investigating this issue. Regina
Corrective Action:
The infotainment system fails to work - it is where I can access information re: maintenance schedule, or any info that is associated with a lit engine light. In addition the charging system for my mobile phone has ceased working. This includes both the usb ports and the lighter port which can be adapted with a charger that works in that receptable. These are all safety issues as far as I am concerned. Not having information related to the vehicle engine light is a big issue, but so is the fact that I can't charge my phone on long distance drives. If I needed assistance, I would be unable to contact anyone without a working cell phone. Because the display also controls the ability to pair a phone with blue tooth, there is concern for other drivers of the Mazda 3 (mine is a 2016) will be using the phone regardless of the bluetooth malfunction. I have seen a safety recall on other Mazda's with relation to the infotainment screen, but I do not see one here. I wonder why? To repair this crucial component would cost many hundreds of dollars -- something I am not in a position to do. Mazda claims this infotainment center is not under warranty, but with so much important information and safety features embedded into it, I think it should be corrected by recall. Thank you for investigating this issue. Regina
Additional Notes:
The infotainment system fails to work - it is where I can access information re: maintenance schedule, or any info that is associated with a lit engine light. In addition the charging system for my mobile phone has ceased working. This includes both the usb ports and the lighter port which can be adapted with a charger that works in that receptable. These are all safety issues as far as I am concerned. Not having information related to the vehicle engine light is a big issue, but so is the fact that I can't charge my phone on long distance drives. If I needed assistance, I would be unable to contact anyone without a working cell phone. Because the display also controls the ability to pair a phone with blue tooth, there is concern for other drivers of the Mazda 3 (mine is a 2016) will be using the phone regardless of the bluetooth malfunction. I have seen a safety recall on other Mazda's with relation to the infotainment screen, but I do not see one here. I wonder why? To repair this crucial component would cost many hundreds of dollars -- something I am not in a position to do. Mazda claims this infotainment center is not under warranty, but with so much important information and safety features embedded into it, I think it should be corrected by recall. Thank you for investigating this issue. Regina
Mfg Campaign: 11432161
Recall Date: Sep 8, 2021
Need Legal Help?
Featured Attorneys
Barry Edzant
Edzant Price LLC
Valencia, CA • 36 yrs
Focus: Lemon Law, Personal Injury
Recent Articles
Jeep Grand Cherokee Head Restraint Problem
Chrysler (FCA US, LLC) has announced a safety issue affecting certain 2023–2024 Jeep Grand Ch ...
Aug 1, 2025Fuel Injector Problem: 2021-2024 Ford Bronco Sport and 2020-2022 Ford Escape
If you own a 2021-2024 Ford Bronco Sport or 2020-2022 Ford Escape equipped with a 1.5L Dragon GTDI e ...
Jul 28, 2025Airbag Problem Affects 2022-2025 Chrysler Pacifica and Voyager Vehicles
If you own a Chrysler Pacifica or Voyager, your vehicle may be equipped with defective side curtain ...
Jul 24, 2025