Complaints & Recalls
Official Safety Recalls - Important!
2 RecallsThese are official manufacturer recalls ordered by NHTSA for safety defects. If you own this vehicle, contact your dealer immediately for free repairs.
Bmw Of North America, Llc
Safety Issue:
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Date: Aug 13, 2024
Consumer Complaints
63 ComplaintsBmw Of North America, Llc
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact stated while driving 20 MPH, the vehicle hesitated, and the contact noticed smoke coming from the engine compartment. The check engine warning light was illuminated. An independent mechanic was contacted. The vehicle was taken to an independent mechanic and was diagnosed and determined that the engine was overheating, and the air condition system had failed. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The contact related the failure to NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The contact stated that the manufacturer had exceeded a reasonable amount of time to repair the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was unknown.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact stated while driving 20 MPH, the vehicle hesitated, and the contact noticed smoke coming from the engine compartment. The check engine warning light was illuminated. An independent mechanic was contacted. The vehicle was taken to an independent mechanic and was diagnosed and determined that the engine was overheating, and the air condition system had failed. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The contact related the failure to NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The contact stated that the manufacturer had exceeded a reasonable amount of time to repair the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was unknown.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact stated while driving 20 MPH, the vehicle hesitated, and the contact noticed smoke coming from the engine compartment. The check engine warning light was illuminated. An independent mechanic was contacted. The vehicle was taken to an independent mechanic and was diagnosed and determined that the engine was overheating, and the air condition system had failed. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The contact related the failure to NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The contact stated that the manufacturer had exceeded a reasonable amount of time to repair the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was unknown.
Mfg Campaign: 11674542
Recall Date: Jul 18, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact stated while driving 20 MPH, the vehicle hesitated, and the contact noticed smoke coming from the engine compartment. The check engine warning light was illuminated. An independent mechanic was contacted. The vehicle was taken to an independent mechanic and was diagnosed and determined that the engine was overheating, and the air condition system had failed. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The contact related the failure to NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The contact stated that the manufacturer had exceeded a reasonable amount of time to repair the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was unknown.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact stated while driving 20 MPH, the vehicle hesitated, and the contact noticed smoke coming from the engine compartment. The check engine warning light was illuminated. An independent mechanic was contacted. The vehicle was taken to an independent mechanic and was diagnosed and determined that the engine was overheating, and the air condition system had failed. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The contact related the failure to NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The contact stated that the manufacturer had exceeded a reasonable amount of time to repair the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was unknown.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact stated while driving 20 MPH, the vehicle hesitated, and the contact noticed smoke coming from the engine compartment. The check engine warning light was illuminated. An independent mechanic was contacted. The vehicle was taken to an independent mechanic and was diagnosed and determined that the engine was overheating, and the air condition system had failed. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The contact related the failure to NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The contact stated that the manufacturer had exceeded a reasonable amount of time to repair the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was unknown.
Mfg Campaign: 11674542
Recall Date: Jul 18, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The engine coolant pump on my 2016 BMW 4 Series has an open recall (#24V-608), issued in August 2024. It’s been almost a year, and the remedy is still marked as "Not Available." Recently, my check engine light came on. I used my personal OBD-II scanner and retrieved fault code U019F, which indicates “Lost Communication with Engine Coolant Pump Control Module.” This is directly related to the recalled component. I contacted BMW of Bay Ridge in Brooklyn, NY, and they told me I need to pay $335 for a diagnostic, even though I already provided the fault code and it matches the recall issue. They said this is a “standard diagnostic fee,” and they do not offer reimbursement even if it turns out to be related to the recall. BMW North America customer support told me that if a dealership confirms the fault is recall-related, they may try to expedite the remedy. But to get that confirmation, I’m expected to pay out of pocket first — which I find unacceptable since the part is already under an open recall and has now failed. So far, no dealer or service center has inspected the vehicle officially because I don’t want to pay $335 to confirm something I already know. Yes, my safety is at risk — the engine cooling system is compromised, and I’m afraid to drive the car. I feel severely impacted and stuck in a situation where BMW won’t take responsibility unless I pay first. This is unreasonable. I believe BMW should cover diagnostics or offer another way to confirm the issue without forcing owners to pay out of pocket for their known safety defect. I’m requesting NHTSA’s help in resolving this issue.
Corrective Action:
The engine coolant pump on my 2016 BMW 4 Series has an open recall (#24V-608), issued in August 2024. It’s been almost a year, and the remedy is still marked as "Not Available." Recently, my check engine light came on. I used my personal OBD-II scanner and retrieved fault code U019F, which indicates “Lost Communication with Engine Coolant Pump Control Module.” This is directly related to the recalled component. I contacted BMW of Bay Ridge in Brooklyn, NY, and they told me I need to pay $335 for a diagnostic, even though I already provided the fault code and it matches the recall issue. They said this is a “standard diagnostic fee,” and they do not offer reimbursement even if it turns out to be related to the recall. BMW North America customer support told me that if a dealership confirms the fault is recall-related, they may try to expedite the remedy. But to get that confirmation, I’m expected to pay out of pocket first — which I find unacceptable since the part is already under an open recall and has now failed. So far, no dealer or service center has inspected the vehicle officially because I don’t want to pay $335 to confirm something I already know. Yes, my safety is at risk — the engine cooling system is compromised, and I’m afraid to drive the car. I feel severely impacted and stuck in a situation where BMW won’t take responsibility unless I pay first. This is unreasonable. I believe BMW should cover diagnostics or offer another way to confirm the issue without forcing owners to pay out of pocket for their known safety defect. I’m requesting NHTSA’s help in resolving this issue.
Additional Notes:
The engine coolant pump on my 2016 BMW 4 Series has an open recall (#24V-608), issued in August 2024. It’s been almost a year, and the remedy is still marked as "Not Available." Recently, my check engine light came on. I used my personal OBD-II scanner and retrieved fault code U019F, which indicates “Lost Communication with Engine Coolant Pump Control Module.” This is directly related to the recalled component. I contacted BMW of Bay Ridge in Brooklyn, NY, and they told me I need to pay $335 for a diagnostic, even though I already provided the fault code and it matches the recall issue. They said this is a “standard diagnostic fee,” and they do not offer reimbursement even if it turns out to be related to the recall. BMW North America customer support told me that if a dealership confirms the fault is recall-related, they may try to expedite the remedy. But to get that confirmation, I’m expected to pay out of pocket first — which I find unacceptable since the part is already under an open recall and has now failed. So far, no dealer or service center has inspected the vehicle officially because I don’t want to pay $335 to confirm something I already know. Yes, my safety is at risk — the engine cooling system is compromised, and I’m afraid to drive the car. I feel severely impacted and stuck in a situation where BMW won’t take responsibility unless I pay first. This is unreasonable. I believe BMW should cover diagnostics or offer another way to confirm the issue without forcing owners to pay out of pocket for their known safety defect. I’m requesting NHTSA’s help in resolving this issue.
Mfg Campaign: 11663282
Recall Date: May 27, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE
Potential Consequences:
The engine coolant pump on my 2016 BMW 4 Series has an open recall (#24V-608), issued in August 2024. It’s been almost a year, and the remedy is still marked as "Not Available." Recently, my check engine light came on. I used my personal OBD-II scanner and retrieved fault code U019F, which indicates “Lost Communication with Engine Coolant Pump Control Module.” This is directly related to the recalled component. I contacted BMW of Bay Ridge in Brooklyn, NY, and they told me I need to pay $335 for a diagnostic, even though I already provided the fault code and it matches the recall issue. They said this is a “standard diagnostic fee,” and they do not offer reimbursement even if it turns out to be related to the recall. BMW North America customer support told me that if a dealership confirms the fault is recall-related, they may try to expedite the remedy. But to get that confirmation, I’m expected to pay out of pocket first — which I find unacceptable since the part is already under an open recall and has now failed. So far, no dealer or service center has inspected the vehicle officially because I don’t want to pay $335 to confirm something I already know. Yes, my safety is at risk — the engine cooling system is compromised, and I’m afraid to drive the car. I feel severely impacted and stuck in a situation where BMW won’t take responsibility unless I pay first. This is unreasonable. I believe BMW should cover diagnostics or offer another way to confirm the issue without forcing owners to pay out of pocket for their known safety defect. I’m requesting NHTSA’s help in resolving this issue.
Corrective Action:
The engine coolant pump on my 2016 BMW 4 Series has an open recall (#24V-608), issued in August 2024. It’s been almost a year, and the remedy is still marked as "Not Available." Recently, my check engine light came on. I used my personal OBD-II scanner and retrieved fault code U019F, which indicates “Lost Communication with Engine Coolant Pump Control Module.” This is directly related to the recalled component. I contacted BMW of Bay Ridge in Brooklyn, NY, and they told me I need to pay $335 for a diagnostic, even though I already provided the fault code and it matches the recall issue. They said this is a “standard diagnostic fee,” and they do not offer reimbursement even if it turns out to be related to the recall. BMW North America customer support told me that if a dealership confirms the fault is recall-related, they may try to expedite the remedy. But to get that confirmation, I’m expected to pay out of pocket first — which I find unacceptable since the part is already under an open recall and has now failed. So far, no dealer or service center has inspected the vehicle officially because I don’t want to pay $335 to confirm something I already know. Yes, my safety is at risk — the engine cooling system is compromised, and I’m afraid to drive the car. I feel severely impacted and stuck in a situation where BMW won’t take responsibility unless I pay first. This is unreasonable. I believe BMW should cover diagnostics or offer another way to confirm the issue without forcing owners to pay out of pocket for their known safety defect. I’m requesting NHTSA’s help in resolving this issue.
Additional Notes:
The engine coolant pump on my 2016 BMW 4 Series has an open recall (#24V-608), issued in August 2024. It’s been almost a year, and the remedy is still marked as "Not Available." Recently, my check engine light came on. I used my personal OBD-II scanner and retrieved fault code U019F, which indicates “Lost Communication with Engine Coolant Pump Control Module.” This is directly related to the recalled component. I contacted BMW of Bay Ridge in Brooklyn, NY, and they told me I need to pay $335 for a diagnostic, even though I already provided the fault code and it matches the recall issue. They said this is a “standard diagnostic fee,” and they do not offer reimbursement even if it turns out to be related to the recall. BMW North America customer support told me that if a dealership confirms the fault is recall-related, they may try to expedite the remedy. But to get that confirmation, I’m expected to pay out of pocket first — which I find unacceptable since the part is already under an open recall and has now failed. So far, no dealer or service center has inspected the vehicle officially because I don’t want to pay $335 to confirm something I already know. Yes, my safety is at risk — the engine cooling system is compromised, and I’m afraid to drive the car. I feel severely impacted and stuck in a situation where BMW won’t take responsibility unless I pay first. This is unreasonable. I believe BMW should cover diagnostics or offer another way to confirm the issue without forcing owners to pay out of pocket for their known safety defect. I’m requesting NHTSA’s help in resolving this issue.
Mfg Campaign: 11663282
Recall Date: May 27, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11657753
Recall Date: Apr 30, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11657753
Recall Date: Apr 30, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11656235
Recall Date: Apr 23, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11656235
Recall Date: Apr 23, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that several dealers were contacted, and the contact was informed that parts were no longer available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available .
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that several dealers were contacted, and the contact was informed that parts were no longer available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available .
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that several dealers were contacted, and the contact was informed that parts were no longer available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available .
Mfg Campaign: 11653432
Recall Date: Apr 8, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that several dealers were contacted, and the contact was informed that parts were no longer available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available .
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that several dealers were contacted, and the contact was informed that parts were no longer available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available .
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that several dealers were contacted, and the contact was informed that parts were no longer available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available .
Mfg Campaign: 11653432
Recall Date: Apr 8, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11651956
Recall Date: Apr 1, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11651956
Recall Date: Apr 1, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE
Potential Consequences:
My 2016 BMW 428i is part of an active recall for a defective engine coolant pump. This defect caused damage to my coolant housing, water pump, thermostat, and engine, and BMW has stated there is no fix available. My vehicle is unsafe and undrivable, yet BMW has not provided any solutions. I am requesting that NHTSA investigate and require BMW to provide a resolution, such as repairs, compensation, or a buyback.
Corrective Action:
My 2016 BMW 428i is part of an active recall for a defective engine coolant pump. This defect caused damage to my coolant housing, water pump, thermostat, and engine, and BMW has stated there is no fix available. My vehicle is unsafe and undrivable, yet BMW has not provided any solutions. I am requesting that NHTSA investigate and require BMW to provide a resolution, such as repairs, compensation, or a buyback.
Additional Notes:
My 2016 BMW 428i is part of an active recall for a defective engine coolant pump. This defect caused damage to my coolant housing, water pump, thermostat, and engine, and BMW has stated there is no fix available. My vehicle is unsafe and undrivable, yet BMW has not provided any solutions. I am requesting that NHTSA investigate and require BMW to provide a resolution, such as repairs, compensation, or a buyback.
Mfg Campaign: 11651121
Recall Date: Mar 27, 2025
Bmw Of North America, Llc
Defect Description:
UNKNOWN OR OTHER
Potential Consequences:
My 2016 BMW 428i is part of an active recall for a defective engine coolant pump. This defect caused damage to my coolant housing, water pump, thermostat, and engine, and BMW has stated there is no fix available. My vehicle is unsafe and undrivable, yet BMW has not provided any solutions. I am requesting that NHTSA investigate and require BMW to provide a resolution, such as repairs, compensation, or a buyback.
Corrective Action:
My 2016 BMW 428i is part of an active recall for a defective engine coolant pump. This defect caused damage to my coolant housing, water pump, thermostat, and engine, and BMW has stated there is no fix available. My vehicle is unsafe and undrivable, yet BMW has not provided any solutions. I am requesting that NHTSA investigate and require BMW to provide a resolution, such as repairs, compensation, or a buyback.
Additional Notes:
My 2016 BMW 428i is part of an active recall for a defective engine coolant pump. This defect caused damage to my coolant housing, water pump, thermostat, and engine, and BMW has stated there is no fix available. My vehicle is unsafe and undrivable, yet BMW has not provided any solutions. I am requesting that NHTSA investigate and require BMW to provide a resolution, such as repairs, compensation, or a buyback.
Mfg Campaign: 11651121
Recall Date: Mar 27, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The manufacturer has not remedied recall number 24V-608 Water Pump Electrical Connector in a reasonable time. I have contacted my BMW local service provider and they say the manufacturer has nor supplied the necessary parts with no commitment n when parts will be available.
Corrective Action:
The manufacturer has not remedied recall number 24V-608 Water Pump Electrical Connector in a reasonable time. I have contacted my BMW local service provider and they say the manufacturer has nor supplied the necessary parts with no commitment n when parts will be available.
Additional Notes:
The manufacturer has not remedied recall number 24V-608 Water Pump Electrical Connector in a reasonable time. I have contacted my BMW local service provider and they say the manufacturer has nor supplied the necessary parts with no commitment n when parts will be available.
Mfg Campaign: 11650196
Recall Date: Mar 24, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11649199
Recall Date: Mar 19, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11649199
Recall Date: Mar 19, 2025
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11646714
Recall Date: Mar 6, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11646714
Recall Date: Mar 6, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical system); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical system); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2016 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical system); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11644528
Recall Date: Feb 24, 2025
Need Legal Help?
Featured Attorneys
Barry Edzant
Edzant Price LLC
Valencia, CA • 36 yrs
Focus: Lemon Law, Personal Injury
Recent Articles
Jeep Grand Cherokee Head Restraint Problem
Chrysler (FCA US, LLC) has announced a safety issue affecting certain 2023–2024 Jeep Grand Ch ...
Aug 1, 2025