Complaints & Recalls
Official Safety Recalls - Important!
4 RecallsThese are official manufacturer recalls ordered by NHTSA for safety defects. If you own this vehicle, contact your dealer immediately for free repairs.
Bmw Of North America, Llc
Safety Issue:
BMW of North America, LLC (BMW) is recalling certain 2016-2017 MINI Cooper Clubman, Cooper S Clubman and JCW Clubman vehicles. When the affected vehicles are braking and the turn signals are on, the inner, bumper-mounted, brake light will go out. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Date: Mar 31, 2017
Bmw Of North America, Llc
Safety Issue:
BMW of North America, LLC (BMW) is recalling certain model year 2016-2017 X1 sDrive28i, X1 xDrive28i, MINI Hardtop 4 Door Cooper, Mini Hardtop 4 Door Cooper S, MINI Cooper Clubman, and Cooper S Clubman, 2017 Rolls-Royce Ghost, and 2016 528i vehicles. The vehicle-sensitive locking mechanism of the seat belt Emergency Locking Retractor (ELR) for the driver's seat may not lock as designed. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Date: Oct 17, 2016
Bmw Of North America, Llc
Safety Issue:
BMW of North America, LLC (BMW) is recalling one model year 2016 MINI Cooper Hardtop 2 Door vehicle manufactured November 24, 2015, and one BMW X1 Sports Activity Vehicle (SAV) manufactured October, 19 2015. The steering gearbox may have been manufactured with incorrect parts.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Date: Dec 30, 2015
Bmw Of North America, Llc
Safety Issue:
BMW of North America, LLC (BMW) is recalling certain model year 2014-2016 MINI Cooper S and MINI Cooper two-door vehicles, 2015-2016 MINI John Cooper Works and MINI Cooper S and MINI Cooper four-door vehicles and 2014-2015 BMW i3 vehicles. Due to a manufacturing error, the passenger frontal air bag may not deploy properly in a low speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Date: Oct 7, 2015
Consumer Complaints
50 ComplaintsBmw Of North America, Llc
Defect Description:
ENGINE
Potential Consequences:
Oil filter housing failure. MINI issued a recall for this part in 2014 when the third generation MINI Cooper S/JCW first launched. Unfortunately they did not fix the part and now as time goes on, the issue is occurring with high frequency on every BMW/MINI and Toyota Supra with the BMW B46/B48 2.0L turbocharged engine. The plastic oil filter housings crack causing oil and coolant to leak. In my case oil poured down the front of the hot engine which could have caused a fire. BMW/MINI dealers charge nearly $2500 to repair this failure. The ODI should investigate this concern as it has been reported dozens of times on each model with this engine including the BMW X1 28i/M35, BMW X2 28i/M35, BMW X3 30i, BMW X4 30i, BMW 328i/330i, BMW 528i/530i, BMW 330e hybrid, BMW 530e hybrid, BMW Z4, Toyota Supra 2.0T, MINI Cooper S/JCW 3-door and 5-door, MINI Countryman, MINI Cooper S/JCW Convertible, etc. BMW is aware of this common failure. Thus far BMW has refused to issue a service campaign or recall for this problem which causes owners of these affected vehicles to be out of pocket thousands of dollars. If oil drips onto hot exhaust or into a wiring harness, it could easily cause a fire.
Corrective Action:
Oil filter housing failure. MINI issued a recall for this part in 2014 when the third generation MINI Cooper S/JCW first launched. Unfortunately they did not fix the part and now as time goes on, the issue is occurring with high frequency on every BMW/MINI and Toyota Supra with the BMW B46/B48 2.0L turbocharged engine. The plastic oil filter housings crack causing oil and coolant to leak. In my case oil poured down the front of the hot engine which could have caused a fire. BMW/MINI dealers charge nearly $2500 to repair this failure. The ODI should investigate this concern as it has been reported dozens of times on each model with this engine including the BMW X1 28i/M35, BMW X2 28i/M35, BMW X3 30i, BMW X4 30i, BMW 328i/330i, BMW 528i/530i, BMW 330e hybrid, BMW 530e hybrid, BMW Z4, Toyota Supra 2.0T, MINI Cooper S/JCW 3-door and 5-door, MINI Countryman, MINI Cooper S/JCW Convertible, etc. BMW is aware of this common failure. Thus far BMW has refused to issue a service campaign or recall for this problem which causes owners of these affected vehicles to be out of pocket thousands of dollars. If oil drips onto hot exhaust or into a wiring harness, it could easily cause a fire.
Additional Notes:
Oil filter housing failure. MINI issued a recall for this part in 2014 when the third generation MINI Cooper S/JCW first launched. Unfortunately they did not fix the part and now as time goes on, the issue is occurring with high frequency on every BMW/MINI and Toyota Supra with the BMW B46/B48 2.0L turbocharged engine. The plastic oil filter housings crack causing oil and coolant to leak. In my case oil poured down the front of the hot engine which could have caused a fire. BMW/MINI dealers charge nearly $2500 to repair this failure. The ODI should investigate this concern as it has been reported dozens of times on each model with this engine including the BMW X1 28i/M35, BMW X2 28i/M35, BMW X3 30i, BMW X4 30i, BMW 328i/330i, BMW 528i/530i, BMW 330e hybrid, BMW 530e hybrid, BMW Z4, Toyota Supra 2.0T, MINI Cooper S/JCW 3-door and 5-door, MINI Countryman, MINI Cooper S/JCW Convertible, etc. BMW is aware of this common failure. Thus far BMW has refused to issue a service campaign or recall for this problem which causes owners of these affected vehicles to be out of pocket thousands of dollars. If oil drips onto hot exhaust or into a wiring harness, it could easily cause a fire.
Mfg Campaign: 11639876
Recall Date: Jan 31, 2025
Bmw Of North America, Llc
Defect Description:
ENGINE
Potential Consequences:
Drivetrain error occurred. I pulled codes and found P0015. I added oil, cleared code. The next day the drivetrain error popped back up. Pulled codes and found P0366. I took the vehicle to mechanic for diagnostics and to find the issue. They found faults: 130F11 and 120408. When replacing engine oil and filter, they found metal shavings in the oil; bearing material. They are recommending replacing the engine. Doing research, it appears this has been a common occurrence with these vehicles/engines. Is there a current recall on some of these engines, or a possibility for a discounted replacement due to the issues being widespread? The car has less than 74,000 miles, and the mechanic said it looks like it may have been going on a while. I purchased this car from a used dealership less than 3 months ago, and have already encountered so many unexpected issues. I really expected more from the Mini brand. Thanks.
Corrective Action:
Drivetrain error occurred. I pulled codes and found P0015. I added oil, cleared code. The next day the drivetrain error popped back up. Pulled codes and found P0366. I took the vehicle to mechanic for diagnostics and to find the issue. They found faults: 130F11 and 120408. When replacing engine oil and filter, they found metal shavings in the oil; bearing material. They are recommending replacing the engine. Doing research, it appears this has been a common occurrence with these vehicles/engines. Is there a current recall on some of these engines, or a possibility for a discounted replacement due to the issues being widespread? The car has less than 74,000 miles, and the mechanic said it looks like it may have been going on a while. I purchased this car from a used dealership less than 3 months ago, and have already encountered so many unexpected issues. I really expected more from the Mini brand. Thanks.
Additional Notes:
Drivetrain error occurred. I pulled codes and found P0015. I added oil, cleared code. The next day the drivetrain error popped back up. Pulled codes and found P0366. I took the vehicle to mechanic for diagnostics and to find the issue. They found faults: 130F11 and 120408. When replacing engine oil and filter, they found metal shavings in the oil; bearing material. They are recommending replacing the engine. Doing research, it appears this has been a common occurrence with these vehicles/engines. Is there a current recall on some of these engines, or a possibility for a discounted replacement due to the issues being widespread? The car has less than 74,000 miles, and the mechanic said it looks like it may have been going on a while. I purchased this car from a used dealership less than 3 months ago, and have already encountered so many unexpected issues. I really expected more from the Mini brand. Thanks.
Mfg Campaign: 11636617
Recall Date: Jan 17, 2025
Bmw Of North America, Llc
Defect Description:
POWER TRAIN
Potential Consequences:
Drivetrain error occurred. I pulled codes and found P0015. I added oil, cleared code. The next day the drivetrain error popped back up. Pulled codes and found P0366. I took the vehicle to mechanic for diagnostics and to find the issue. They found faults: 130F11 and 120408. When replacing engine oil and filter, they found metal shavings in the oil; bearing material. They are recommending replacing the engine. Doing research, it appears this has been a common occurrence with these vehicles/engines. Is there a current recall on some of these engines, or a possibility for a discounted replacement due to the issues being widespread? The car has less than 74,000 miles, and the mechanic said it looks like it may have been going on a while. I purchased this car from a used dealership less than 3 months ago, and have already encountered so many unexpected issues. I really expected more from the Mini brand. Thanks.
Corrective Action:
Drivetrain error occurred. I pulled codes and found P0015. I added oil, cleared code. The next day the drivetrain error popped back up. Pulled codes and found P0366. I took the vehicle to mechanic for diagnostics and to find the issue. They found faults: 130F11 and 120408. When replacing engine oil and filter, they found metal shavings in the oil; bearing material. They are recommending replacing the engine. Doing research, it appears this has been a common occurrence with these vehicles/engines. Is there a current recall on some of these engines, or a possibility for a discounted replacement due to the issues being widespread? The car has less than 74,000 miles, and the mechanic said it looks like it may have been going on a while. I purchased this car from a used dealership less than 3 months ago, and have already encountered so many unexpected issues. I really expected more from the Mini brand. Thanks.
Additional Notes:
Drivetrain error occurred. I pulled codes and found P0015. I added oil, cleared code. The next day the drivetrain error popped back up. Pulled codes and found P0366. I took the vehicle to mechanic for diagnostics and to find the issue. They found faults: 130F11 and 120408. When replacing engine oil and filter, they found metal shavings in the oil; bearing material. They are recommending replacing the engine. Doing research, it appears this has been a common occurrence with these vehicles/engines. Is there a current recall on some of these engines, or a possibility for a discounted replacement due to the issues being widespread? The car has less than 74,000 miles, and the mechanic said it looks like it may have been going on a while. I purchased this car from a used dealership less than 3 months ago, and have already encountered so many unexpected issues. I really expected more from the Mini brand. Thanks.
Mfg Campaign: 11636617
Recall Date: Jan 17, 2025
Bmw Of North America, Llc
Defect Description:
SERVICE BRAKES
Potential Consequences:
While driving straight on an Interstate highway at approximately 65 mph, the right front and left rear brakes momentarily locked up after the windshield wipers were turned on due to light rain starting to fall. This happened multiple times, only when the wipers were turned on. There were no warning lights illuminated in the instrument cluster or dash displays. This nearly caused a loss of vehicle control on several occasions and nearly caused an accident as well. The car has been routinely serviced to factory schedules including brake fluid time based changes. There appeared to be some occasional delay in the release of the brakes when starting from a stop. The brakes were serviced after this incident and the service center recommended completing a few panic stops to operate the ABS system. They could not explain how the wiper system can cause one circuit of the braking system to operate momentarily. A search of web forums for the F56 series MINI shows that this random locking of the RF & LR brakes with teh wipers in operation has happened to quite a few other owners of similar Mini Coopers. This problem creates a very significant safety risk.
Corrective Action:
While driving straight on an Interstate highway at approximately 65 mph, the right front and left rear brakes momentarily locked up after the windshield wipers were turned on due to light rain starting to fall. This happened multiple times, only when the wipers were turned on. There were no warning lights illuminated in the instrument cluster or dash displays. This nearly caused a loss of vehicle control on several occasions and nearly caused an accident as well. The car has been routinely serviced to factory schedules including brake fluid time based changes. There appeared to be some occasional delay in the release of the brakes when starting from a stop. The brakes were serviced after this incident and the service center recommended completing a few panic stops to operate the ABS system. They could not explain how the wiper system can cause one circuit of the braking system to operate momentarily. A search of web forums for the F56 series MINI shows that this random locking of the RF & LR brakes with teh wipers in operation has happened to quite a few other owners of similar Mini Coopers. This problem creates a very significant safety risk.
Additional Notes:
While driving straight on an Interstate highway at approximately 65 mph, the right front and left rear brakes momentarily locked up after the windshield wipers were turned on due to light rain starting to fall. This happened multiple times, only when the wipers were turned on. There were no warning lights illuminated in the instrument cluster or dash displays. This nearly caused a loss of vehicle control on several occasions and nearly caused an accident as well. The car has been routinely serviced to factory schedules including brake fluid time based changes. There appeared to be some occasional delay in the release of the brakes when starting from a stop. The brakes were serviced after this incident and the service center recommended completing a few panic stops to operate the ABS system. They could not explain how the wiper system can cause one circuit of the braking system to operate momentarily. A search of web forums for the F56 series MINI shows that this random locking of the RF & LR brakes with teh wipers in operation has happened to quite a few other owners of similar Mini Coopers. This problem creates a very significant safety risk.
Mfg Campaign: 11614123
Recall Date: Sep 12, 2024
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
While driving straight on an Interstate highway at approximately 65 mph, the right front and left rear brakes momentarily locked up after the windshield wipers were turned on due to light rain starting to fall. This happened multiple times, only when the wipers were turned on. There were no warning lights illuminated in the instrument cluster or dash displays. This nearly caused a loss of vehicle control on several occasions and nearly caused an accident as well. The car has been routinely serviced to factory schedules including brake fluid time based changes. There appeared to be some occasional delay in the release of the brakes when starting from a stop. The brakes were serviced after this incident and the service center recommended completing a few panic stops to operate the ABS system. They could not explain how the wiper system can cause one circuit of the braking system to operate momentarily. A search of web forums for the F56 series MINI shows that this random locking of the RF & LR brakes with teh wipers in operation has happened to quite a few other owners of similar Mini Coopers. This problem creates a very significant safety risk.
Corrective Action:
While driving straight on an Interstate highway at approximately 65 mph, the right front and left rear brakes momentarily locked up after the windshield wipers were turned on due to light rain starting to fall. This happened multiple times, only when the wipers were turned on. There were no warning lights illuminated in the instrument cluster or dash displays. This nearly caused a loss of vehicle control on several occasions and nearly caused an accident as well. The car has been routinely serviced to factory schedules including brake fluid time based changes. There appeared to be some occasional delay in the release of the brakes when starting from a stop. The brakes were serviced after this incident and the service center recommended completing a few panic stops to operate the ABS system. They could not explain how the wiper system can cause one circuit of the braking system to operate momentarily. A search of web forums for the F56 series MINI shows that this random locking of the RF & LR brakes with teh wipers in operation has happened to quite a few other owners of similar Mini Coopers. This problem creates a very significant safety risk.
Additional Notes:
While driving straight on an Interstate highway at approximately 65 mph, the right front and left rear brakes momentarily locked up after the windshield wipers were turned on due to light rain starting to fall. This happened multiple times, only when the wipers were turned on. There were no warning lights illuminated in the instrument cluster or dash displays. This nearly caused a loss of vehicle control on several occasions and nearly caused an accident as well. The car has been routinely serviced to factory schedules including brake fluid time based changes. There appeared to be some occasional delay in the release of the brakes when starting from a stop. The brakes were serviced after this incident and the service center recommended completing a few panic stops to operate the ABS system. They could not explain how the wiper system can cause one circuit of the braking system to operate momentarily. A search of web forums for the F56 series MINI shows that this random locking of the RF & LR brakes with teh wipers in operation has happened to quite a few other owners of similar Mini Coopers. This problem creates a very significant safety risk.
Mfg Campaign: 11614123
Recall Date: Sep 12, 2024
Bmw Of North America, Llc
Defect Description:
ENGINE
Potential Consequences:
Had recurring engine warning light which will only reset for one ignition cycle. Took to dealer to read code and result was "LIN bus communication fault for environmental air catalyst sensor". This is the same problem drivers of the Mini Cooper S model have reported and received an extended warranty from Mini of North America (15 year / 150000 mi) with replacement of sensor and radiator. However, talking with Mini of North America, the extended warranty does not apply to the base model 5-door Cooper because not enough complaints have been recorded. If more people report this issue, it could be covered just as the S-model is being covered. In the meantime, the car will not pass an emissions inspection with the light on, and Mini dealer wants $2000 to replace radiator and sensor. Car currently has about 70,000 miles on it, but engine light as been on for approximately 15 months (emissions inspection is required every 24 months). I have a decent code reader, but it only provides "U019D generic code" which is why I took it to Mini dealer.
Corrective Action:
Had recurring engine warning light which will only reset for one ignition cycle. Took to dealer to read code and result was "LIN bus communication fault for environmental air catalyst sensor". This is the same problem drivers of the Mini Cooper S model have reported and received an extended warranty from Mini of North America (15 year / 150000 mi) with replacement of sensor and radiator. However, talking with Mini of North America, the extended warranty does not apply to the base model 5-door Cooper because not enough complaints have been recorded. If more people report this issue, it could be covered just as the S-model is being covered. In the meantime, the car will not pass an emissions inspection with the light on, and Mini dealer wants $2000 to replace radiator and sensor. Car currently has about 70,000 miles on it, but engine light as been on for approximately 15 months (emissions inspection is required every 24 months). I have a decent code reader, but it only provides "U019D generic code" which is why I took it to Mini dealer.
Additional Notes:
Had recurring engine warning light which will only reset for one ignition cycle. Took to dealer to read code and result was "LIN bus communication fault for environmental air catalyst sensor". This is the same problem drivers of the Mini Cooper S model have reported and received an extended warranty from Mini of North America (15 year / 150000 mi) with replacement of sensor and radiator. However, talking with Mini of North America, the extended warranty does not apply to the base model 5-door Cooper because not enough complaints have been recorded. If more people report this issue, it could be covered just as the S-model is being covered. In the meantime, the car will not pass an emissions inspection with the light on, and Mini dealer wants $2000 to replace radiator and sensor. Car currently has about 70,000 miles on it, but engine light as been on for approximately 15 months (emissions inspection is required every 24 months). I have a decent code reader, but it only provides "U019D generic code" which is why I took it to Mini dealer.
Mfg Campaign: 11609588
Recall Date: Aug 20, 2024
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
Rear passenger tail light casing/bucket had burnt connections. Replaced casing/bucket and bulb. Worked for short time, tail light failed a second time. Casing/bucket & bulb replaced, again worked for short time and then went out. Took vehicle to another mechanic after passenger side headlight failed. New mechanic checked casings/bucket - connections looked okay, however both wiring harnesses were severely burnt. Headlight harness was all bare wires. Mechanic unable to determine cause of the severe heat that would lead to both the headlight & taillight wiring harnesses becoming burnt so severely. Mechanic was concerned of the potential for this issue to cause vehicle fire. Suggested to follow up with dealership to have lights & wiring harnesses on Driver side checked After research online regarding this year/make/model - I have found numerous other reports of other owners experiencing the same issues with burned wiring harnesses causing both front and rear light failure with no known causes.
Corrective Action:
Rear passenger tail light casing/bucket had burnt connections. Replaced casing/bucket and bulb. Worked for short time, tail light failed a second time. Casing/bucket & bulb replaced, again worked for short time and then went out. Took vehicle to another mechanic after passenger side headlight failed. New mechanic checked casings/bucket - connections looked okay, however both wiring harnesses were severely burnt. Headlight harness was all bare wires. Mechanic unable to determine cause of the severe heat that would lead to both the headlight & taillight wiring harnesses becoming burnt so severely. Mechanic was concerned of the potential for this issue to cause vehicle fire. Suggested to follow up with dealership to have lights & wiring harnesses on Driver side checked After research online regarding this year/make/model - I have found numerous other reports of other owners experiencing the same issues with burned wiring harnesses causing both front and rear light failure with no known causes.
Additional Notes:
Rear passenger tail light casing/bucket had burnt connections. Replaced casing/bucket and bulb. Worked for short time, tail light failed a second time. Casing/bucket & bulb replaced, again worked for short time and then went out. Took vehicle to another mechanic after passenger side headlight failed. New mechanic checked casings/bucket - connections looked okay, however both wiring harnesses were severely burnt. Headlight harness was all bare wires. Mechanic unable to determine cause of the severe heat that would lead to both the headlight & taillight wiring harnesses becoming burnt so severely. Mechanic was concerned of the potential for this issue to cause vehicle fire. Suggested to follow up with dealership to have lights & wiring harnesses on Driver side checked After research online regarding this year/make/model - I have found numerous other reports of other owners experiencing the same issues with burned wiring harnesses causing both front and rear light failure with no known causes.
Mfg Campaign: 11605757
Recall Date: Jul 31, 2024
Bmw Of North America, Llc
Defect Description:
EXTERIOR LIGHTING
Potential Consequences:
Rear passenger tail light casing/bucket had burnt connections. Replaced casing/bucket and bulb. Worked for short time, tail light failed a second time. Casing/bucket & bulb replaced, again worked for short time and then went out. Took vehicle to another mechanic after passenger side headlight failed. New mechanic checked casings/bucket - connections looked okay, however both wiring harnesses were severely burnt. Headlight harness was all bare wires. Mechanic unable to determine cause of the severe heat that would lead to both the headlight & taillight wiring harnesses becoming burnt so severely. Mechanic was concerned of the potential for this issue to cause vehicle fire. Suggested to follow up with dealership to have lights & wiring harnesses on Driver side checked After research online regarding this year/make/model - I have found numerous other reports of other owners experiencing the same issues with burned wiring harnesses causing both front and rear light failure with no known causes.
Corrective Action:
Rear passenger tail light casing/bucket had burnt connections. Replaced casing/bucket and bulb. Worked for short time, tail light failed a second time. Casing/bucket & bulb replaced, again worked for short time and then went out. Took vehicle to another mechanic after passenger side headlight failed. New mechanic checked casings/bucket - connections looked okay, however both wiring harnesses were severely burnt. Headlight harness was all bare wires. Mechanic unable to determine cause of the severe heat that would lead to both the headlight & taillight wiring harnesses becoming burnt so severely. Mechanic was concerned of the potential for this issue to cause vehicle fire. Suggested to follow up with dealership to have lights & wiring harnesses on Driver side checked After research online regarding this year/make/model - I have found numerous other reports of other owners experiencing the same issues with burned wiring harnesses causing both front and rear light failure with no known causes.
Additional Notes:
Rear passenger tail light casing/bucket had burnt connections. Replaced casing/bucket and bulb. Worked for short time, tail light failed a second time. Casing/bucket & bulb replaced, again worked for short time and then went out. Took vehicle to another mechanic after passenger side headlight failed. New mechanic checked casings/bucket - connections looked okay, however both wiring harnesses were severely burnt. Headlight harness was all bare wires. Mechanic unable to determine cause of the severe heat that would lead to both the headlight & taillight wiring harnesses becoming burnt so severely. Mechanic was concerned of the potential for this issue to cause vehicle fire. Suggested to follow up with dealership to have lights & wiring harnesses on Driver side checked After research online regarding this year/make/model - I have found numerous other reports of other owners experiencing the same issues with burned wiring harnesses causing both front and rear light failure with no known causes.
Mfg Campaign: 11605757
Recall Date: Jul 31, 2024
Bmw Of North America, Llc
Defect Description:
ENGINE
Potential Consequences:
My Mini service adviser said the timing case cover is seeping and will continue to get worse until the seep becomes a leak and the oil starts dripping onto the manifold, potentially creating a fire. It is at the seepage stage now and therefore my extended warranty will not fix it. My Mini service adviser said she doesn’t think it is dangerous yet but I have to keep an eye on it as this is a common problem on Minis. They quoted me a price of $934 to replace the timing case cover itself. I researched the problem online and found this is a common problem and will need my attention to ensure it doesn’t get dangerous before I’m able to get it repaired.
Corrective Action:
My Mini service adviser said the timing case cover is seeping and will continue to get worse until the seep becomes a leak and the oil starts dripping onto the manifold, potentially creating a fire. It is at the seepage stage now and therefore my extended warranty will not fix it. My Mini service adviser said she doesn’t think it is dangerous yet but I have to keep an eye on it as this is a common problem on Minis. They quoted me a price of $934 to replace the timing case cover itself. I researched the problem online and found this is a common problem and will need my attention to ensure it doesn’t get dangerous before I’m able to get it repaired.
Additional Notes:
My Mini service adviser said the timing case cover is seeping and will continue to get worse until the seep becomes a leak and the oil starts dripping onto the manifold, potentially creating a fire. It is at the seepage stage now and therefore my extended warranty will not fix it. My Mini service adviser said she doesn’t think it is dangerous yet but I have to keep an eye on it as this is a common problem on Minis. They quoted me a price of $934 to replace the timing case cover itself. I researched the problem online and found this is a common problem and will need my attention to ensure it doesn’t get dangerous before I’m able to get it repaired.
Mfg Campaign: 11600982
Recall Date: Jul 10, 2024
Bmw Of North America, Llc
Defect Description:
ENGINE
Potential Consequences:
Notes from Beckley Auto Service from 2-12-24. "Verified warning light on, retrieved one code for LIN bus communication fault for environmental air catalyst sensor. Checked and found technical service bulletin (TSB) from Mini Cooper M13 01 19. The chemical composition of the fan shroud contaminates the sensor. This repair involves the replacing of the radiator with each sensor and fan shroud. Should be covered under Mini Coopers emissions warranty. Called Mini Cooper of Des Moines(Jerimiah) and was advised that this vehicle does not have and extended parts warranty/warranty extension on the environmental sensor. Would recommend contacting Mini Cooper Customer service or Mini Cooper North America for assistance." I did contact Mini Cooper customer service North America and was told my vin does not fall within this TSB. When asked why my vehicle with the identical engine and issues specified in the TSB is not covered I was told, "I don't know."
Corrective Action:
Notes from Beckley Auto Service from 2-12-24. "Verified warning light on, retrieved one code for LIN bus communication fault for environmental air catalyst sensor. Checked and found technical service bulletin (TSB) from Mini Cooper M13 01 19. The chemical composition of the fan shroud contaminates the sensor. This repair involves the replacing of the radiator with each sensor and fan shroud. Should be covered under Mini Coopers emissions warranty. Called Mini Cooper of Des Moines(Jerimiah) and was advised that this vehicle does not have and extended parts warranty/warranty extension on the environmental sensor. Would recommend contacting Mini Cooper Customer service or Mini Cooper North America for assistance." I did contact Mini Cooper customer service North America and was told my vin does not fall within this TSB. When asked why my vehicle with the identical engine and issues specified in the TSB is not covered I was told, "I don't know."
Additional Notes:
Notes from Beckley Auto Service from 2-12-24. "Verified warning light on, retrieved one code for LIN bus communication fault for environmental air catalyst sensor. Checked and found technical service bulletin (TSB) from Mini Cooper M13 01 19. The chemical composition of the fan shroud contaminates the sensor. This repair involves the replacing of the radiator with each sensor and fan shroud. Should be covered under Mini Coopers emissions warranty. Called Mini Cooper of Des Moines(Jerimiah) and was advised that this vehicle does not have and extended parts warranty/warranty extension on the environmental sensor. Would recommend contacting Mini Cooper Customer service or Mini Cooper North America for assistance." I did contact Mini Cooper customer service North America and was told my vin does not fall within this TSB. When asked why my vehicle with the identical engine and issues specified in the TSB is not covered I was told, "I don't know."
Mfg Campaign: 11573298
Recall Date: Feb 22, 2024
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
* Component/ system that has malfunctioned and failed - The Driver side tail light circuit board and pig tail malfunctioned. The connector has corroded and the plastic plug housing looks melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal the reverse light and the brake light inoperable on the effected side. YES, MY VEHICLE IS AVAILABLE FOR INSPECTION AT ANY TIME. *A driver behind an affected vehicle could be confused which could increase the risk of a crash. *The vehicle has been inspected by a licensed MINI Dealership. They failed to report two of the three nonworking rear lights that have failed due to the connector becoming corroded. The corroded plastic plug housing becomes melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. In this case it is the rear driver side. *There was/ is no warning until long after the first second and/ or third rear light(S) were not operable. Intermittently (sometimes) a warning will popup when turning on the vehicle. The vehicle will not warn the driver about and and / or all three lights each and every time the vehicle is turned on. ALSO while the vehicle is in drive or in reverse , the driver will not have any warning what so ever that the three lights 1. The driver side rear break light 2. The driver side rear reverse light 3. The driver side rear turn signal are not working due to a malfunction. * note that there is a very strong burnt/melted smell that comes from the connector as well. I could smell it on my fingers after removing the connector so I could check the rear bulbs for replacement. Please note the 1st photo-this is how the dealership left my connector after their assessment. Additional photos are of the connector/ pig tail/ circuit board corrosion. Intermittent warrnings for some of the nonworking lights.
Corrective Action:
* Component/ system that has malfunctioned and failed - The Driver side tail light circuit board and pig tail malfunctioned. The connector has corroded and the plastic plug housing looks melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal the reverse light and the brake light inoperable on the effected side. YES, MY VEHICLE IS AVAILABLE FOR INSPECTION AT ANY TIME. *A driver behind an affected vehicle could be confused which could increase the risk of a crash. *The vehicle has been inspected by a licensed MINI Dealership. They failed to report two of the three nonworking rear lights that have failed due to the connector becoming corroded. The corroded plastic plug housing becomes melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. In this case it is the rear driver side. *There was/ is no warning until long after the first second and/ or third rear light(S) were not operable. Intermittently (sometimes) a warning will popup when turning on the vehicle. The vehicle will not warn the driver about and and / or all three lights each and every time the vehicle is turned on. ALSO while the vehicle is in drive or in reverse , the driver will not have any warning what so ever that the three lights 1. The driver side rear break light 2. The driver side rear reverse light 3. The driver side rear turn signal are not working due to a malfunction. * note that there is a very strong burnt/melted smell that comes from the connector as well. I could smell it on my fingers after removing the connector so I could check the rear bulbs for replacement. Please note the 1st photo-this is how the dealership left my connector after their assessment. Additional photos are of the connector/ pig tail/ circuit board corrosion. Intermittent warrnings for some of the nonworking lights.
Additional Notes:
* Component/ system that has malfunctioned and failed - The Driver side tail light circuit board and pig tail malfunctioned. The connector has corroded and the plastic plug housing looks melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal the reverse light and the brake light inoperable on the effected side. YES, MY VEHICLE IS AVAILABLE FOR INSPECTION AT ANY TIME. *A driver behind an affected vehicle could be confused which could increase the risk of a crash. *The vehicle has been inspected by a licensed MINI Dealership. They failed to report two of the three nonworking rear lights that have failed due to the connector becoming corroded. The corroded plastic plug housing becomes melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. In this case it is the rear driver side. *There was/ is no warning until long after the first second and/ or third rear light(S) were not operable. Intermittently (sometimes) a warning will popup when turning on the vehicle. The vehicle will not warn the driver about and and / or all three lights each and every time the vehicle is turned on. ALSO while the vehicle is in drive or in reverse , the driver will not have any warning what so ever that the three lights 1. The driver side rear break light 2. The driver side rear reverse light 3. The driver side rear turn signal are not working due to a malfunction. * note that there is a very strong burnt/melted smell that comes from the connector as well. I could smell it on my fingers after removing the connector so I could check the rear bulbs for replacement. Please note the 1st photo-this is how the dealership left my connector after their assessment. Additional photos are of the connector/ pig tail/ circuit board corrosion. Intermittent warrnings for some of the nonworking lights.
Mfg Campaign: 11569727
Recall Date: Feb 3, 2024
Bmw Of North America, Llc
Defect Description:
EXTERIOR LIGHTING
Potential Consequences:
* Component/ system that has malfunctioned and failed - The Driver side tail light circuit board and pig tail malfunctioned. The connector has corroded and the plastic plug housing looks melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal the reverse light and the brake light inoperable on the effected side. YES, MY VEHICLE IS AVAILABLE FOR INSPECTION AT ANY TIME. *A driver behind an affected vehicle could be confused which could increase the risk of a crash. *The vehicle has been inspected by a licensed MINI Dealership. They failed to report two of the three nonworking rear lights that have failed due to the connector becoming corroded. The corroded plastic plug housing becomes melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. In this case it is the rear driver side. *There was/ is no warning until long after the first second and/ or third rear light(S) were not operable. Intermittently (sometimes) a warning will popup when turning on the vehicle. The vehicle will not warn the driver about and and / or all three lights each and every time the vehicle is turned on. ALSO while the vehicle is in drive or in reverse , the driver will not have any warning what so ever that the three lights 1. The driver side rear break light 2. The driver side rear reverse light 3. The driver side rear turn signal are not working due to a malfunction. * note that there is a very strong burnt/melted smell that comes from the connector as well. I could smell it on my fingers after removing the connector so I could check the rear bulbs for replacement. Please note the 1st photo-this is how the dealership left my connector after their assessment. Additional photos are of the connector/ pig tail/ circuit board corrosion. Intermittent warrnings for some of the nonworking lights.
Corrective Action:
* Component/ system that has malfunctioned and failed - The Driver side tail light circuit board and pig tail malfunctioned. The connector has corroded and the plastic plug housing looks melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal the reverse light and the brake light inoperable on the effected side. YES, MY VEHICLE IS AVAILABLE FOR INSPECTION AT ANY TIME. *A driver behind an affected vehicle could be confused which could increase the risk of a crash. *The vehicle has been inspected by a licensed MINI Dealership. They failed to report two of the three nonworking rear lights that have failed due to the connector becoming corroded. The corroded plastic plug housing becomes melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. In this case it is the rear driver side. *There was/ is no warning until long after the first second and/ or third rear light(S) were not operable. Intermittently (sometimes) a warning will popup when turning on the vehicle. The vehicle will not warn the driver about and and / or all three lights each and every time the vehicle is turned on. ALSO while the vehicle is in drive or in reverse , the driver will not have any warning what so ever that the three lights 1. The driver side rear break light 2. The driver side rear reverse light 3. The driver side rear turn signal are not working due to a malfunction. * note that there is a very strong burnt/melted smell that comes from the connector as well. I could smell it on my fingers after removing the connector so I could check the rear bulbs for replacement. Please note the 1st photo-this is how the dealership left my connector after their assessment. Additional photos are of the connector/ pig tail/ circuit board corrosion. Intermittent warrnings for some of the nonworking lights.
Additional Notes:
* Component/ system that has malfunctioned and failed - The Driver side tail light circuit board and pig tail malfunctioned. The connector has corroded and the plastic plug housing looks melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal the reverse light and the brake light inoperable on the effected side. YES, MY VEHICLE IS AVAILABLE FOR INSPECTION AT ANY TIME. *A driver behind an affected vehicle could be confused which could increase the risk of a crash. *The vehicle has been inspected by a licensed MINI Dealership. They failed to report two of the three nonworking rear lights that have failed due to the connector becoming corroded. The corroded plastic plug housing becomes melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. In this case it is the rear driver side. *There was/ is no warning until long after the first second and/ or third rear light(S) were not operable. Intermittently (sometimes) a warning will popup when turning on the vehicle. The vehicle will not warn the driver about and and / or all three lights each and every time the vehicle is turned on. ALSO while the vehicle is in drive or in reverse , the driver will not have any warning what so ever that the three lights 1. The driver side rear break light 2. The driver side rear reverse light 3. The driver side rear turn signal are not working due to a malfunction. * note that there is a very strong burnt/melted smell that comes from the connector as well. I could smell it on my fingers after removing the connector so I could check the rear bulbs for replacement. Please note the 1st photo-this is how the dealership left my connector after their assessment. Additional photos are of the connector/ pig tail/ circuit board corrosion. Intermittent warrnings for some of the nonworking lights.
Mfg Campaign: 11569727
Recall Date: Feb 3, 2024
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
There is a design issue resulting in failure of the connector for the rear tail light assembly. The connector corrodes and the plastic plug housing melts. This damages the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. This has happened on the right rear of our Mini Cooper JCW hardtop. Searching on the web shows this to be a common problem for the F55, F56 & F57 MINIs. As this failure makes the car brake light system non-compliant with FMVSS lighting requirements, there should be a recall to address this issue.
Corrective Action:
There is a design issue resulting in failure of the connector for the rear tail light assembly. The connector corrodes and the plastic plug housing melts. This damages the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. This has happened on the right rear of our Mini Cooper JCW hardtop. Searching on the web shows this to be a common problem for the F55, F56 & F57 MINIs. As this failure makes the car brake light system non-compliant with FMVSS lighting requirements, there should be a recall to address this issue.
Additional Notes:
There is a design issue resulting in failure of the connector for the rear tail light assembly. The connector corrodes and the plastic plug housing melts. This damages the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. This has happened on the right rear of our Mini Cooper JCW hardtop. Searching on the web shows this to be a common problem for the F55, F56 & F57 MINIs. As this failure makes the car brake light system non-compliant with FMVSS lighting requirements, there should be a recall to address this issue.
Mfg Campaign: 11562935
Recall Date: Jan 1, 2024
Bmw Of North America, Llc
Defect Description:
EXTERIOR LIGHTING
Potential Consequences:
There is a design issue resulting in failure of the connector for the rear tail light assembly. The connector corrodes and the plastic plug housing melts. This damages the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. This has happened on the right rear of our Mini Cooper JCW hardtop. Searching on the web shows this to be a common problem for the F55, F56 & F57 MINIs. As this failure makes the car brake light system non-compliant with FMVSS lighting requirements, there should be a recall to address this issue.
Corrective Action:
There is a design issue resulting in failure of the connector for the rear tail light assembly. The connector corrodes and the plastic plug housing melts. This damages the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. This has happened on the right rear of our Mini Cooper JCW hardtop. Searching on the web shows this to be a common problem for the F55, F56 & F57 MINIs. As this failure makes the car brake light system non-compliant with FMVSS lighting requirements, there should be a recall to address this issue.
Additional Notes:
There is a design issue resulting in failure of the connector for the rear tail light assembly. The connector corrodes and the plastic plug housing melts. This damages the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. This has happened on the right rear of our Mini Cooper JCW hardtop. Searching on the web shows this to be a common problem for the F55, F56 & F57 MINIs. As this failure makes the car brake light system non-compliant with FMVSS lighting requirements, there should be a recall to address this issue.
Mfg Campaign: 11562935
Recall Date: Jan 1, 2024
Bmw Of North America, Llc
Defect Description:
POWER TRAIN
Potential Consequences:
Error signal "Secure vehicle with parking brake when stopped" Mini dealer says "common problem" with Mini transmissions and always due to fluid leaking thru shifter onto gear shift mechanism. Lots of forums stating this is common. Unclear why Mini not taking responsibility for this due to poor design. How many cars ever get a failure such as this? None that I can find except MIni and BMW with similar transmissions.
Corrective Action:
Error signal "Secure vehicle with parking brake when stopped" Mini dealer says "common problem" with Mini transmissions and always due to fluid leaking thru shifter onto gear shift mechanism. Lots of forums stating this is common. Unclear why Mini not taking responsibility for this due to poor design. How many cars ever get a failure such as this? None that I can find except MIni and BMW with similar transmissions.
Additional Notes:
Error signal "Secure vehicle with parking brake when stopped" Mini dealer says "common problem" with Mini transmissions and always due to fluid leaking thru shifter onto gear shift mechanism. Lots of forums stating this is common. Unclear why Mini not taking responsibility for this due to poor design. How many cars ever get a failure such as this? None that I can find except MIni and BMW with similar transmissions.
Mfg Campaign: 11561607
Recall Date: Dec 23, 2023
Bmw Of North America, Llc
Defect Description:
EQUIPMENT
Potential Consequences:
*The condensation drain hose is not properly draining the condensate from the vehicle. The micro-filter is is absorbing condensate water from the evaporator housing. *After a while the water that sits, turns to mold. You dont know about it until it gets to that point. You breathe in mold, constantly until you figure out where it is coming from. *The problem has been confirmed and also confirmed that its a known problem to have with these cars *Yes the care has been inspected by the dealer. *There are no warnings at all
Corrective Action:
*The condensation drain hose is not properly draining the condensate from the vehicle. The micro-filter is is absorbing condensate water from the evaporator housing. *After a while the water that sits, turns to mold. You dont know about it until it gets to that point. You breathe in mold, constantly until you figure out where it is coming from. *The problem has been confirmed and also confirmed that its a known problem to have with these cars *Yes the care has been inspected by the dealer. *There are no warnings at all
Additional Notes:
*The condensation drain hose is not properly draining the condensate from the vehicle. The micro-filter is is absorbing condensate water from the evaporator housing. *After a while the water that sits, turns to mold. You dont know about it until it gets to that point. You breathe in mold, constantly until you figure out where it is coming from. *The problem has been confirmed and also confirmed that its a known problem to have with these cars *Yes the care has been inspected by the dealer. *There are no warnings at all
Mfg Campaign: 11552298
Recall Date: Oct 27, 2023
Bmw Of North America, Llc
Defect Description:
POWER TRAIN
Potential Consequences:
About two days ago I noticed my MINI started showing an error every time I got into the vehicle saying "Secure vehicle against rolling" I have seen numerous different discussions online but none seemed to come to a solution or single cause of this error. Everything still shifts completely fine in the car, the parking brake engages, and the car shifts into park fine. Seems to be a common problem, it's a shame MINI has not addressed it as a recall.
Corrective Action:
About two days ago I noticed my MINI started showing an error every time I got into the vehicle saying "Secure vehicle against rolling" I have seen numerous different discussions online but none seemed to come to a solution or single cause of this error. Everything still shifts completely fine in the car, the parking brake engages, and the car shifts into park fine. Seems to be a common problem, it's a shame MINI has not addressed it as a recall.
Additional Notes:
About two days ago I noticed my MINI started showing an error every time I got into the vehicle saying "Secure vehicle against rolling" I have seen numerous different discussions online but none seemed to come to a solution or single cause of this error. Everything still shifts completely fine in the car, the parking brake engages, and the car shifts into park fine. Seems to be a common problem, it's a shame MINI has not addressed it as a recall.
Mfg Campaign: 11538855
Recall Date: Aug 16, 2023
Bmw Of North America, Llc
Defect Description:
EXTERIOR LIGHTING
Potential Consequences:
Rear tail lights have a bulb socket and a 6-pin connector that have a tendency to burn at the brown ground wire where the connector and bulb socket meet. Requiring replacement of both parts and disabling the rear tail light (brake, turn, and reverse lights). It requires rewiring the 6-pin connector and replacing the bulb socket. About $60 in parts. When this occurs it an alert comes on the dash of a malfunction to all three rear lighting functions. One or all three of the lights can be affected. However, due to the complexity of the parts and labor required, it can be burdensome for people to diagnose and then afford to repair, if they don’t know how to repair themselves. Web searches helped me diagnose the issue and find the burnt connections on our vehicle, with folks commenting of a known issue on MINIs and BMWs for this type of connection, surprised it hasn’t been part of a recall. An example can be found here: https://www.mini2.com/threads/solution-driver-side-tail-light-failure-melted-connector.361711/
Corrective Action:
Rear tail lights have a bulb socket and a 6-pin connector that have a tendency to burn at the brown ground wire where the connector and bulb socket meet. Requiring replacement of both parts and disabling the rear tail light (brake, turn, and reverse lights). It requires rewiring the 6-pin connector and replacing the bulb socket. About $60 in parts. When this occurs it an alert comes on the dash of a malfunction to all three rear lighting functions. One or all three of the lights can be affected. However, due to the complexity of the parts and labor required, it can be burdensome for people to diagnose and then afford to repair, if they don’t know how to repair themselves. Web searches helped me diagnose the issue and find the burnt connections on our vehicle, with folks commenting of a known issue on MINIs and BMWs for this type of connection, surprised it hasn’t been part of a recall. An example can be found here: https://www.mini2.com/threads/solution-driver-side-tail-light-failure-melted-connector.361711/
Additional Notes:
Rear tail lights have a bulb socket and a 6-pin connector that have a tendency to burn at the brown ground wire where the connector and bulb socket meet. Requiring replacement of both parts and disabling the rear tail light (brake, turn, and reverse lights). It requires rewiring the 6-pin connector and replacing the bulb socket. About $60 in parts. When this occurs it an alert comes on the dash of a malfunction to all three rear lighting functions. One or all three of the lights can be affected. However, due to the complexity of the parts and labor required, it can be burdensome for people to diagnose and then afford to repair, if they don’t know how to repair themselves. Web searches helped me diagnose the issue and find the burnt connections on our vehicle, with folks commenting of a known issue on MINIs and BMWs for this type of connection, surprised it hasn’t been part of a recall. An example can be found here: https://www.mini2.com/threads/solution-driver-side-tail-light-failure-melted-connector.361711/
Mfg Campaign: 11516815
Recall Date: Apr 12, 2023
Bmw Of North America, Llc
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
Rear tail lights have a bulb socket and a 6-pin connector that have a tendency to burn at the brown ground wire where the connector and bulb socket meet. Requiring replacement of both parts and disabling the rear tail light (brake, turn, and reverse lights). It requires rewiring the 6-pin connector and replacing the bulb socket. About $60 in parts. When this occurs it an alert comes on the dash of a malfunction to all three rear lighting functions. One or all three of the lights can be affected. However, due to the complexity of the parts and labor required, it can be burdensome for people to diagnose and then afford to repair, if they don’t know how to repair themselves. Web searches helped me diagnose the issue and find the burnt connections on our vehicle, with folks commenting of a known issue on MINIs and BMWs for this type of connection, surprised it hasn’t been part of a recall. An example can be found here: https://www.mini2.com/threads/solution-driver-side-tail-light-failure-melted-connector.361711/
Corrective Action:
Rear tail lights have a bulb socket and a 6-pin connector that have a tendency to burn at the brown ground wire where the connector and bulb socket meet. Requiring replacement of both parts and disabling the rear tail light (brake, turn, and reverse lights). It requires rewiring the 6-pin connector and replacing the bulb socket. About $60 in parts. When this occurs it an alert comes on the dash of a malfunction to all three rear lighting functions. One or all three of the lights can be affected. However, due to the complexity of the parts and labor required, it can be burdensome for people to diagnose and then afford to repair, if they don’t know how to repair themselves. Web searches helped me diagnose the issue and find the burnt connections on our vehicle, with folks commenting of a known issue on MINIs and BMWs for this type of connection, surprised it hasn’t been part of a recall. An example can be found here: https://www.mini2.com/threads/solution-driver-side-tail-light-failure-melted-connector.361711/
Additional Notes:
Rear tail lights have a bulb socket and a 6-pin connector that have a tendency to burn at the brown ground wire where the connector and bulb socket meet. Requiring replacement of both parts and disabling the rear tail light (brake, turn, and reverse lights). It requires rewiring the 6-pin connector and replacing the bulb socket. About $60 in parts. When this occurs it an alert comes on the dash of a malfunction to all three rear lighting functions. One or all three of the lights can be affected. However, due to the complexity of the parts and labor required, it can be burdensome for people to diagnose and then afford to repair, if they don’t know how to repair themselves. Web searches helped me diagnose the issue and find the burnt connections on our vehicle, with folks commenting of a known issue on MINIs and BMWs for this type of connection, surprised it hasn’t been part of a recall. An example can be found here: https://www.mini2.com/threads/solution-driver-side-tail-light-failure-melted-connector.361711/
Mfg Campaign: 11516815
Recall Date: Apr 12, 2023
Bmw Of North America, Llc
Defect Description:
POWER TRAIN
Potential Consequences:
"Secure Vehicle from Rolling" comes up in instrument cluster and millions of Mini/BMW's have this problem due to a faulty gear shifter selector knob going bad due to a spring in the gear selector box. Annoying because the part fails over time and dealer wants $3000 for the fix. Please help!!
Corrective Action:
"Secure Vehicle from Rolling" comes up in instrument cluster and millions of Mini/BMW's have this problem due to a faulty gear shifter selector knob going bad due to a spring in the gear selector box. Annoying because the part fails over time and dealer wants $3000 for the fix. Please help!!
Additional Notes:
"Secure Vehicle from Rolling" comes up in instrument cluster and millions of Mini/BMW's have this problem due to a faulty gear shifter selector knob going bad due to a spring in the gear selector box. Annoying because the part fails over time and dealer wants $3000 for the fix. Please help!!
Mfg Campaign: 11514968
Recall Date: Apr 1, 2023
Need Legal Help?
Featured Attorneys
Barry Edzant
Edzant Price LLC
Valencia, CA • 36 yrs
Focus: Lemon Law, Personal Injury