MAZDA MAZDA6 2016

Complete listing of complaints and recalls for this vehicle

105
Complaints
3
Recalls

Complaints & Recalls

105 Complaints 3 Recalls

Official Safety Recalls - Important!

3 Recalls

These are official manufacturer recalls ordered by NHTSA for safety defects. If you own this vehicle, contact your dealer immediately for free repairs.

Mazda North American Operations
NHTSA Campaign: 17V546000 SAFETY RECALL
51.9K Vehicles Affected
Recall Date: Aug 31, 2017
Safety Issue:

Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.

Potential Risk:
If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.
FREE Recall Solution:
Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.
Additional Details:

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Action Required: Contact your local MAZDA dealer to schedule your FREE recall repair.
Manufacturer: MAZDA
Mfg Campaign: 1517H
Notice Date: Oct 26, 2017
Recall Date: Aug 31, 2017

Consumer Complaints

105 Complaints
Mazda Motor Corp.
Campaign: 11676202 Other
Jul 25, 2025
Defect Description:

AIR BAGS

Potential Consequences:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Corrective Action:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Additional Notes:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Manufacturer: MAZDA
Mfg Campaign: 11676202
Notice Date: Jul 25, 2025
Recall Date: Jul 25, 2025
Mazda Motor Corp.
Campaign: 11676202 Other
Jul 25, 2025
Defect Description:

SEAT BELTS

Potential Consequences:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Corrective Action:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Additional Notes:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Manufacturer: MAZDA
Mfg Campaign: 11676202
Notice Date: Jul 25, 2025
Recall Date: Jul 25, 2025
Mazda Motor Corp.
Campaign: 11676202 Other
Jul 25, 2025
Defect Description:

SEATS

Potential Consequences:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Corrective Action:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Additional Notes:

My seat doesn’t detect if passanger is in seat so my air bag engine light goes on and off it was recalled and mazda supposedly cleared the issue but seems like they didnt fix it the recall properly

Manufacturer: MAZDA
Mfg Campaign: 11676202
Notice Date: Jul 25, 2025
Recall Date: Jul 25, 2025
Mazda Motor Corp.
Campaign: 11673547 Other
Jul 14, 2025
Defect Description:

SEATS

Potential Consequences:

1) UNKNOWN. My guess: The front seats or guard rails. 2) Very seat when braking, and coming to and from a stop. Poses as a safety risk. 3) Yes, no remedy/solution was yielded. Others on forums who visited dealership stated that the dealership said it was “normal”. Despite the other side not having the issue at all. 4) No 5) No Full assessment: The issue of this complaint lies within the front seat of the vehicle. My educated guess is that there is a defect within the seat rails of the vehicle as no remedy seems to be found upon extensive research on google and various forums. Specifically, in my vehicle and may others that I have found, have issues with the driver seat feeling loose when braking or hitting the gas from a stop. Many individuals (including my close friend) have raised this to dealerships and were told that this is “normal” despite the passenger seat (or vice versa) does not have the same issue whatsoever with no remedy. I personally have tightened all possible nuts and bolts for the seat AND brought it to multiple shops and dealerships, which yielded no remedy as all bolts were in fact tightened. I strongly believe that this issue should be further investigated and mitigated as it poses as a risk of serious injury - whether involved in an accident or the seat coming loose, or off entirely. The best way to describe the amount of play is sitting on a chair that is placed on an uneven floor, with one corner rocking toward itself. Or a table that is placed on an unleveled floor and is rocking towards one end (which that remedy consists of folding an napkin enough times to stick it under one of the legs). Please note that I have had this car for a couple of years and this one thing that grinds my gears.. aside from the plastic rattle of the driver side window switch module when listening to music.

Corrective Action:

1) UNKNOWN. My guess: The front seats or guard rails. 2) Very seat when braking, and coming to and from a stop. Poses as a safety risk. 3) Yes, no remedy/solution was yielded. Others on forums who visited dealership stated that the dealership said it was “normal”. Despite the other side not having the issue at all. 4) No 5) No Full assessment: The issue of this complaint lies within the front seat of the vehicle. My educated guess is that there is a defect within the seat rails of the vehicle as no remedy seems to be found upon extensive research on google and various forums. Specifically, in my vehicle and may others that I have found, have issues with the driver seat feeling loose when braking or hitting the gas from a stop. Many individuals (including my close friend) have raised this to dealerships and were told that this is “normal” despite the passenger seat (or vice versa) does not have the same issue whatsoever with no remedy. I personally have tightened all possible nuts and bolts for the seat AND brought it to multiple shops and dealerships, which yielded no remedy as all bolts were in fact tightened. I strongly believe that this issue should be further investigated and mitigated as it poses as a risk of serious injury - whether involved in an accident or the seat coming loose, or off entirely. The best way to describe the amount of play is sitting on a chair that is placed on an uneven floor, with one corner rocking toward itself. Or a table that is placed on an unleveled floor and is rocking towards one end (which that remedy consists of folding an napkin enough times to stick it under one of the legs). Please note that I have had this car for a couple of years and this one thing that grinds my gears.. aside from the plastic rattle of the driver side window switch module when listening to music.

Additional Notes:

1) UNKNOWN. My guess: The front seats or guard rails. 2) Very seat when braking, and coming to and from a stop. Poses as a safety risk. 3) Yes, no remedy/solution was yielded. Others on forums who visited dealership stated that the dealership said it was “normal”. Despite the other side not having the issue at all. 4) No 5) No Full assessment: The issue of this complaint lies within the front seat of the vehicle. My educated guess is that there is a defect within the seat rails of the vehicle as no remedy seems to be found upon extensive research on google and various forums. Specifically, in my vehicle and may others that I have found, have issues with the driver seat feeling loose when braking or hitting the gas from a stop. Many individuals (including my close friend) have raised this to dealerships and were told that this is “normal” despite the passenger seat (or vice versa) does not have the same issue whatsoever with no remedy. I personally have tightened all possible nuts and bolts for the seat AND brought it to multiple shops and dealerships, which yielded no remedy as all bolts were in fact tightened. I strongly believe that this issue should be further investigated and mitigated as it poses as a risk of serious injury - whether involved in an accident or the seat coming loose, or off entirely. The best way to describe the amount of play is sitting on a chair that is placed on an uneven floor, with one corner rocking toward itself. Or a table that is placed on an unleveled floor and is rocking towards one end (which that remedy consists of folding an napkin enough times to stick it under one of the legs). Please note that I have had this car for a couple of years and this one thing that grinds my gears.. aside from the plastic rattle of the driver side window switch module when listening to music.

Manufacturer: MAZDA
Mfg Campaign: 11673547
Notice Date: Jul 14, 2025
Recall Date: Jul 14, 2025
Mazda Motor Corp.
Campaign: 11667949 Other
1 Vehicles Affected
Jun 19, 2025
Defect Description:

ELECTRICAL SYSTEM

Potential Consequences:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Corrective Action:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Additional Notes:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Manufacturer: MAZDA
Mfg Campaign: 11667949
Notice Date: Jun 19, 2025
Recall Date: Jun 19, 2025
Mazda Motor Corp.
Campaign: 11667949 Other
1 Vehicles Affected
Jun 19, 2025
Defect Description:

POWER TRAIN

Potential Consequences:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Corrective Action:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Additional Notes:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Manufacturer: MAZDA
Mfg Campaign: 11667949
Notice Date: Jun 19, 2025
Recall Date: Jun 19, 2025
Mazda Motor Corp.
Campaign: 11667949 Other
1 Vehicles Affected
Jun 19, 2025
Defect Description:

ENGINE

Potential Consequences:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Corrective Action:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Additional Notes:

PCM ISSUE, passenger air bag issue, OCS wiring issue. infotainment system, transmission, and engine. Key fobs not able to be reprogrammed due to PCM issue

Manufacturer: MAZDA
Mfg Campaign: 11667949
Notice Date: Jun 19, 2025
Recall Date: Jun 19, 2025
Mazda Motor Corp.
Campaign: 11665545 Other
Jun 7, 2025
Defect Description:

SEATS

Potential Consequences:

Driver seat is unstable and has been since I purchased the vehicle. I never got it looked at because I can't afford repairs. There was a recall for the passenger seat and I believe it would be for the driver seat as well given the driver seat stability is crucial. It rocks as if it isn't fully secure. You notice it sometimes when getting in and out the car and I became noticable when my dog decided to jump into my seat one day when cleaning my interior and I saw the seat heavily rock forward and backward. You sometimes notice it as well when coming to a stop from highway speeds the seat will slightly tilt forward. This issue has been with the car after i purchased it in 2018 but didn't notice it until a few months after the purchase.

Corrective Action:

Driver seat is unstable and has been since I purchased the vehicle. I never got it looked at because I can't afford repairs. There was a recall for the passenger seat and I believe it would be for the driver seat as well given the driver seat stability is crucial. It rocks as if it isn't fully secure. You notice it sometimes when getting in and out the car and I became noticable when my dog decided to jump into my seat one day when cleaning my interior and I saw the seat heavily rock forward and backward. You sometimes notice it as well when coming to a stop from highway speeds the seat will slightly tilt forward. This issue has been with the car after i purchased it in 2018 but didn't notice it until a few months after the purchase.

Additional Notes:

Driver seat is unstable and has been since I purchased the vehicle. I never got it looked at because I can't afford repairs. There was a recall for the passenger seat and I believe it would be for the driver seat as well given the driver seat stability is crucial. It rocks as if it isn't fully secure. You notice it sometimes when getting in and out the car and I became noticable when my dog decided to jump into my seat one day when cleaning my interior and I saw the seat heavily rock forward and backward. You sometimes notice it as well when coming to a stop from highway speeds the seat will slightly tilt forward. This issue has been with the car after i purchased it in 2018 but didn't notice it until a few months after the purchase.

Manufacturer: MAZDA
Mfg Campaign: 11665545
Notice Date: Jun 7, 2025
Recall Date: Jun 7, 2025
Mazda Motor Corp.
Campaign: 11650328 Other
Mar 24, 2025
Defect Description:

POWER TRAIN

Potential Consequences:

The contact owns a 2016 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle. The transmission warning light was illuminated. The vehicle was not diagnosed or repaired. The contact associated the failure with NHTSA Campaign Number: 15V451000 (Suspension). The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000.

Corrective Action:

The contact owns a 2016 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle. The transmission warning light was illuminated. The vehicle was not diagnosed or repaired. The contact associated the failure with NHTSA Campaign Number: 15V451000 (Suspension). The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000.

Additional Notes:

The contact owns a 2016 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle. The transmission warning light was illuminated. The vehicle was not diagnosed or repaired. The contact associated the failure with NHTSA Campaign Number: 15V451000 (Suspension). The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000.

Manufacturer: MAZDA
Mfg Campaign: 11650328
Notice Date: Mar 24, 2025
Recall Date: Mar 24, 2025
Mazda Motor Corp.
Campaign: 11650328 Other
Mar 24, 2025
Defect Description:

SUSPENSION

Potential Consequences:

The contact owns a 2016 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle. The transmission warning light was illuminated. The vehicle was not diagnosed or repaired. The contact associated the failure with NHTSA Campaign Number: 15V451000 (Suspension). The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000.

Corrective Action:

The contact owns a 2016 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle. The transmission warning light was illuminated. The vehicle was not diagnosed or repaired. The contact associated the failure with NHTSA Campaign Number: 15V451000 (Suspension). The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000.

Additional Notes:

The contact owns a 2016 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle. The transmission warning light was illuminated. The vehicle was not diagnosed or repaired. The contact associated the failure with NHTSA Campaign Number: 15V451000 (Suspension). The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000.

Manufacturer: MAZDA
Mfg Campaign: 11650328
Notice Date: Mar 24, 2025
Recall Date: Mar 24, 2025
Mazda Motor Corp.
Campaign: 11648241 Other
Mar 13, 2025
Defect Description:

AIR BAGS

Potential Consequences:

My passenger air bag doesn’t turn on when passenger is in vehicle, sensor for air bag turns on and off as if it can’t determine if a person is on the seat. My dashboard has the SRS OCS light on. My vehicle has already been seen by Mazda to fix the recall but I am afraid to drive and suddenly air bags go off.

Corrective Action:

My passenger air bag doesn’t turn on when passenger is in vehicle, sensor for air bag turns on and off as if it can’t determine if a person is on the seat. My dashboard has the SRS OCS light on. My vehicle has already been seen by Mazda to fix the recall but I am afraid to drive and suddenly air bags go off.

Additional Notes:

My passenger air bag doesn’t turn on when passenger is in vehicle, sensor for air bag turns on and off as if it can’t determine if a person is on the seat. My dashboard has the SRS OCS light on. My vehicle has already been seen by Mazda to fix the recall but I am afraid to drive and suddenly air bags go off.

Manufacturer: MAZDA
Mfg Campaign: 11648241
Notice Date: Mar 13, 2025
Recall Date: Mar 13, 2025
Mazda Motor Corp.
Campaign: 11629784 Other
Dec 9, 2024
Defect Description:

FUEL/PROPULSION SYSTEM

Potential Consequences:

Fuel smell in & outside of vehicle after fuel fill, being a retired Master Technician I decided to investigate this and after removing the the fuel tank access door under the rear seat I was shocked to see that on an 8 year old vehicle the fuel sender retainer is completely rusted out. An overfill, an aggressive maneuver or small collision could prove disastrous with this condition pending! I have just ordered a replacement since I intend to repair this myself and that is only of the tank itself is not compromised when I proceed to remove the rusted out screws as well. Also after further investigation I find this is nothing new to Mazda and actually had this same condition in previous years but I assume chose not to prevent it from happening in future models. I will be attaching a photo of it.

Corrective Action:

Fuel smell in & outside of vehicle after fuel fill, being a retired Master Technician I decided to investigate this and after removing the the fuel tank access door under the rear seat I was shocked to see that on an 8 year old vehicle the fuel sender retainer is completely rusted out. An overfill, an aggressive maneuver or small collision could prove disastrous with this condition pending! I have just ordered a replacement since I intend to repair this myself and that is only of the tank itself is not compromised when I proceed to remove the rusted out screws as well. Also after further investigation I find this is nothing new to Mazda and actually had this same condition in previous years but I assume chose not to prevent it from happening in future models. I will be attaching a photo of it.

Additional Notes:

Fuel smell in & outside of vehicle after fuel fill, being a retired Master Technician I decided to investigate this and after removing the the fuel tank access door under the rear seat I was shocked to see that on an 8 year old vehicle the fuel sender retainer is completely rusted out. An overfill, an aggressive maneuver or small collision could prove disastrous with this condition pending! I have just ordered a replacement since I intend to repair this myself and that is only of the tank itself is not compromised when I proceed to remove the rusted out screws as well. Also after further investigation I find this is nothing new to Mazda and actually had this same condition in previous years but I assume chose not to prevent it from happening in future models. I will be attaching a photo of it.

Manufacturer: MAZDA
Mfg Campaign: 11629784
Notice Date: Dec 9, 2024
Recall Date: Dec 9, 2024
Mazda Motor Corp.
Campaign: 11628289 Other
Dec 2, 2024
Defect Description:

TIRES:BEAD

Potential Consequences:

I bought the Bridgestone tires in Sept 2023 from Walmart. On Nov 23, 2024, I went to Walmart auto center to have 4 Bridgestone tires rotated and balanced. The tech discovered severe bead separation in 3 of 4 tires. I had to buy 4 new tires. I have pictures of the tires with bead separation on the wheel rims and also off the rims.

Corrective Action:

I bought the Bridgestone tires in Sept 2023 from Walmart. On Nov 23, 2024, I went to Walmart auto center to have 4 Bridgestone tires rotated and balanced. The tech discovered severe bead separation in 3 of 4 tires. I had to buy 4 new tires. I have pictures of the tires with bead separation on the wheel rims and also off the rims.

Additional Notes:

I bought the Bridgestone tires in Sept 2023 from Walmart. On Nov 23, 2024, I went to Walmart auto center to have 4 Bridgestone tires rotated and balanced. The tech discovered severe bead separation in 3 of 4 tires. I had to buy 4 new tires. I have pictures of the tires with bead separation on the wheel rims and also off the rims.

Manufacturer: MAZDA
Mfg Campaign: 11628289
Notice Date: Dec 2, 2024
Recall Date: Dec 2, 2024
Mazda Motor Corp.
Campaign: 11594101 Other
Jun 13, 2024
Defect Description:

UNKNOWN OR OTHER

Potential Consequences:

Moonroof explosion Moonroof had spontaneous explosion while driving on highway. No objects were seen flying towards front of car prior to explosion. Driver and 1 passenger in front seat. Sun shade partially open resulting in glass coming into the car. No accident or injury occurred. Moonroof closed at time of explosion.

Corrective Action:

Moonroof explosion Moonroof had spontaneous explosion while driving on highway. No objects were seen flying towards front of car prior to explosion. Driver and 1 passenger in front seat. Sun shade partially open resulting in glass coming into the car. No accident or injury occurred. Moonroof closed at time of explosion.

Additional Notes:

Moonroof explosion Moonroof had spontaneous explosion while driving on highway. No objects were seen flying towards front of car prior to explosion. Driver and 1 passenger in front seat. Sun shade partially open resulting in glass coming into the car. No accident or injury occurred. Moonroof closed at time of explosion.

Manufacturer: MAZDA
Mfg Campaign: 11594101
Notice Date: Jun 13, 2024
Recall Date: Jun 13, 2024
Mazda Motor Corp.
Campaign: 11590278 Other
May 23, 2024
Defect Description:

VEHICLE SPEED CONTROL

Potential Consequences:

When driving, after a period of 10 - 20 minutes usually, of the adaptive cruise being on (not necessarily in use), the buttons on the steering wheel will re-map. That is, the + button for adjusting the cruise speed up by 1 mph increments will switch with the - button that adjusts the cruise speed down by 1 mph increments. This happens reliably... if I've driven the car with adaptive cruise on for more that 10 - 20 minutes, the buttons will re-map. + slows the car down or doesn't work at all (does nothing). - speeds the car up. Also, rarely, the cancel button will speed the car up. Often the cancel button will not work and the only way to disengage the adaptive cruise is to tap on the brake pedal. Less frequently--maybe about 1/3 - 1/2 of the time, the "off" button, which turns the adaptive cruise off entirely, will not work. Note, that this is not the "engage" or "enable" button. These are the buttons that just turn on and off the adaptive cruise and show that it is now ready to be set if on. I discussed this with the dealer. I believe it is a software problem, they cannot find a software problem as they patched the software in the car up to the latest version. They want to replace the steering wheel where the switches are. This is a $750 repair. (I'm not sure if it's the whole steering wheel or the switch cluster on the wheel.) I cannot afford it and I'm not convinced it will work. I believe they are just guessing at a solution. Nothing to my knowledge has ever spilled on the steering wheel to potentially damage the switchgear. Also, this, to me, does not explain how it always works correctly for the first 10 - 20 minutes of driving, then fails reliably after that. This problem has existed for over two years. Since the car has had about 100,000 miles on it.

Corrective Action:

When driving, after a period of 10 - 20 minutes usually, of the adaptive cruise being on (not necessarily in use), the buttons on the steering wheel will re-map. That is, the + button for adjusting the cruise speed up by 1 mph increments will switch with the - button that adjusts the cruise speed down by 1 mph increments. This happens reliably... if I've driven the car with adaptive cruise on for more that 10 - 20 minutes, the buttons will re-map. + slows the car down or doesn't work at all (does nothing). - speeds the car up. Also, rarely, the cancel button will speed the car up. Often the cancel button will not work and the only way to disengage the adaptive cruise is to tap on the brake pedal. Less frequently--maybe about 1/3 - 1/2 of the time, the "off" button, which turns the adaptive cruise off entirely, will not work. Note, that this is not the "engage" or "enable" button. These are the buttons that just turn on and off the adaptive cruise and show that it is now ready to be set if on. I discussed this with the dealer. I believe it is a software problem, they cannot find a software problem as they patched the software in the car up to the latest version. They want to replace the steering wheel where the switches are. This is a $750 repair. (I'm not sure if it's the whole steering wheel or the switch cluster on the wheel.) I cannot afford it and I'm not convinced it will work. I believe they are just guessing at a solution. Nothing to my knowledge has ever spilled on the steering wheel to potentially damage the switchgear. Also, this, to me, does not explain how it always works correctly for the first 10 - 20 minutes of driving, then fails reliably after that. This problem has existed for over two years. Since the car has had about 100,000 miles on it.

Additional Notes:

When driving, after a period of 10 - 20 minutes usually, of the adaptive cruise being on (not necessarily in use), the buttons on the steering wheel will re-map. That is, the + button for adjusting the cruise speed up by 1 mph increments will switch with the - button that adjusts the cruise speed down by 1 mph increments. This happens reliably... if I've driven the car with adaptive cruise on for more that 10 - 20 minutes, the buttons will re-map. + slows the car down or doesn't work at all (does nothing). - speeds the car up. Also, rarely, the cancel button will speed the car up. Often the cancel button will not work and the only way to disengage the adaptive cruise is to tap on the brake pedal. Less frequently--maybe about 1/3 - 1/2 of the time, the "off" button, which turns the adaptive cruise off entirely, will not work. Note, that this is not the "engage" or "enable" button. These are the buttons that just turn on and off the adaptive cruise and show that it is now ready to be set if on. I discussed this with the dealer. I believe it is a software problem, they cannot find a software problem as they patched the software in the car up to the latest version. They want to replace the steering wheel where the switches are. This is a $750 repair. (I'm not sure if it's the whole steering wheel or the switch cluster on the wheel.) I cannot afford it and I'm not convinced it will work. I believe they are just guessing at a solution. Nothing to my knowledge has ever spilled on the steering wheel to potentially damage the switchgear. Also, this, to me, does not explain how it always works correctly for the first 10 - 20 minutes of driving, then fails reliably after that. This problem has existed for over two years. Since the car has had about 100,000 miles on it.

Manufacturer: MAZDA
Mfg Campaign: 11590278
Notice Date: May 23, 2024
Recall Date: May 23, 2024
Mazda Motor Corp.
Campaign: 11590278 Other
May 23, 2024
Defect Description:

FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL

Potential Consequences:

When driving, after a period of 10 - 20 minutes usually, of the adaptive cruise being on (not necessarily in use), the buttons on the steering wheel will re-map. That is, the + button for adjusting the cruise speed up by 1 mph increments will switch with the - button that adjusts the cruise speed down by 1 mph increments. This happens reliably... if I've driven the car with adaptive cruise on for more that 10 - 20 minutes, the buttons will re-map. + slows the car down or doesn't work at all (does nothing). - speeds the car up. Also, rarely, the cancel button will speed the car up. Often the cancel button will not work and the only way to disengage the adaptive cruise is to tap on the brake pedal. Less frequently--maybe about 1/3 - 1/2 of the time, the "off" button, which turns the adaptive cruise off entirely, will not work. Note, that this is not the "engage" or "enable" button. These are the buttons that just turn on and off the adaptive cruise and show that it is now ready to be set if on. I discussed this with the dealer. I believe it is a software problem, they cannot find a software problem as they patched the software in the car up to the latest version. They want to replace the steering wheel where the switches are. This is a $750 repair. (I'm not sure if it's the whole steering wheel or the switch cluster on the wheel.) I cannot afford it and I'm not convinced it will work. I believe they are just guessing at a solution. Nothing to my knowledge has ever spilled on the steering wheel to potentially damage the switchgear. Also, this, to me, does not explain how it always works correctly for the first 10 - 20 minutes of driving, then fails reliably after that. This problem has existed for over two years. Since the car has had about 100,000 miles on it.

Corrective Action:

When driving, after a period of 10 - 20 minutes usually, of the adaptive cruise being on (not necessarily in use), the buttons on the steering wheel will re-map. That is, the + button for adjusting the cruise speed up by 1 mph increments will switch with the - button that adjusts the cruise speed down by 1 mph increments. This happens reliably... if I've driven the car with adaptive cruise on for more that 10 - 20 minutes, the buttons will re-map. + slows the car down or doesn't work at all (does nothing). - speeds the car up. Also, rarely, the cancel button will speed the car up. Often the cancel button will not work and the only way to disengage the adaptive cruise is to tap on the brake pedal. Less frequently--maybe about 1/3 - 1/2 of the time, the "off" button, which turns the adaptive cruise off entirely, will not work. Note, that this is not the "engage" or "enable" button. These are the buttons that just turn on and off the adaptive cruise and show that it is now ready to be set if on. I discussed this with the dealer. I believe it is a software problem, they cannot find a software problem as they patched the software in the car up to the latest version. They want to replace the steering wheel where the switches are. This is a $750 repair. (I'm not sure if it's the whole steering wheel or the switch cluster on the wheel.) I cannot afford it and I'm not convinced it will work. I believe they are just guessing at a solution. Nothing to my knowledge has ever spilled on the steering wheel to potentially damage the switchgear. Also, this, to me, does not explain how it always works correctly for the first 10 - 20 minutes of driving, then fails reliably after that. This problem has existed for over two years. Since the car has had about 100,000 miles on it.

Additional Notes:

When driving, after a period of 10 - 20 minutes usually, of the adaptive cruise being on (not necessarily in use), the buttons on the steering wheel will re-map. That is, the + button for adjusting the cruise speed up by 1 mph increments will switch with the - button that adjusts the cruise speed down by 1 mph increments. This happens reliably... if I've driven the car with adaptive cruise on for more that 10 - 20 minutes, the buttons will re-map. + slows the car down or doesn't work at all (does nothing). - speeds the car up. Also, rarely, the cancel button will speed the car up. Often the cancel button will not work and the only way to disengage the adaptive cruise is to tap on the brake pedal. Less frequently--maybe about 1/3 - 1/2 of the time, the "off" button, which turns the adaptive cruise off entirely, will not work. Note, that this is not the "engage" or "enable" button. These are the buttons that just turn on and off the adaptive cruise and show that it is now ready to be set if on. I discussed this with the dealer. I believe it is a software problem, they cannot find a software problem as they patched the software in the car up to the latest version. They want to replace the steering wheel where the switches are. This is a $750 repair. (I'm not sure if it's the whole steering wheel or the switch cluster on the wheel.) I cannot afford it and I'm not convinced it will work. I believe they are just guessing at a solution. Nothing to my knowledge has ever spilled on the steering wheel to potentially damage the switchgear. Also, this, to me, does not explain how it always works correctly for the first 10 - 20 minutes of driving, then fails reliably after that. This problem has existed for over two years. Since the car has had about 100,000 miles on it.

Manufacturer: MAZDA
Mfg Campaign: 11590278
Notice Date: May 23, 2024
Recall Date: May 23, 2024
Mazda Motor Corp.
Campaign: 11558470 Other
Dec 5, 2023
Defect Description:

ENGINE

Potential Consequences:

There is a bearing in the crankshaft that looks like it’s not up to spec. No warning lights came on, car suddenly lost power on the highway. Fortunately no one was injured though it was a very scary situation. Mechanic took a look inside the engine and said a main bearing stud broke off and busted a hole through the short block. He said I’m lucky the engine didn’t turn into a grenade. Upon looking up the failure many other people have had the same issue with this engine. The exact same failure on the exact same bolt. Here are some links to some posts: [XXX] [XXX] [XXX] [XXX] Clearly I’m not the only one with this issue, and there are more examples of the same problem that you can find online through out different Mazda models that use the same engine. I can definitely have the vehicle inspected if needed, my mechanic took video of the damage as well. I could only imagine if this happened while there was more traffic on the road, it’s not safe. And the fact I can find more examples means there are probably more that never posted or reported the issue. the vehicle has less than 100k miles which a lot of the examples have the same issue at less than 100k INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Corrective Action:

There is a bearing in the crankshaft that looks like it’s not up to spec. No warning lights came on, car suddenly lost power on the highway. Fortunately no one was injured though it was a very scary situation. Mechanic took a look inside the engine and said a main bearing stud broke off and busted a hole through the short block. He said I’m lucky the engine didn’t turn into a grenade. Upon looking up the failure many other people have had the same issue with this engine. The exact same failure on the exact same bolt. Here are some links to some posts: [XXX] [XXX] [XXX] [XXX] Clearly I’m not the only one with this issue, and there are more examples of the same problem that you can find online through out different Mazda models that use the same engine. I can definitely have the vehicle inspected if needed, my mechanic took video of the damage as well. I could only imagine if this happened while there was more traffic on the road, it’s not safe. And the fact I can find more examples means there are probably more that never posted or reported the issue. the vehicle has less than 100k miles which a lot of the examples have the same issue at less than 100k INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Additional Notes:

There is a bearing in the crankshaft that looks like it’s not up to spec. No warning lights came on, car suddenly lost power on the highway. Fortunately no one was injured though it was a very scary situation. Mechanic took a look inside the engine and said a main bearing stud broke off and busted a hole through the short block. He said I’m lucky the engine didn’t turn into a grenade. Upon looking up the failure many other people have had the same issue with this engine. The exact same failure on the exact same bolt. Here are some links to some posts: [XXX] [XXX] [XXX] [XXX] Clearly I’m not the only one with this issue, and there are more examples of the same problem that you can find online through out different Mazda models that use the same engine. I can definitely have the vehicle inspected if needed, my mechanic took video of the damage as well. I could only imagine if this happened while there was more traffic on the road, it’s not safe. And the fact I can find more examples means there are probably more that never posted or reported the issue. the vehicle has less than 100k miles which a lot of the examples have the same issue at less than 100k INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Manufacturer: MAZDA
Mfg Campaign: 11558470
Notice Date: Dec 5, 2023
Recall Date: Dec 5, 2023
Mazda Motor Corp.
Campaign: 11531004 Other
Jul 8, 2023
Defect Description:

STEERING

Potential Consequences:

I was on freeway when some warning start showing on dashboard ( enging, track control system, battery) then my steering wheel was hard that I couldn’t manubrio i hit a curb that was on the entrance and my car start spinning in circles till i hit the hill on side road.

Corrective Action:

I was on freeway when some warning start showing on dashboard ( enging, track control system, battery) then my steering wheel was hard that I couldn’t manubrio i hit a curb that was on the entrance and my car start spinning in circles till i hit the hill on side road.

Additional Notes:

I was on freeway when some warning start showing on dashboard ( enging, track control system, battery) then my steering wheel was hard that I couldn’t manubrio i hit a curb that was on the entrance and my car start spinning in circles till i hit the hill on side road.

Manufacturer: MAZDA
Mfg Campaign: 11531004
Notice Date: Jul 8, 2023
Recall Date: Jul 8, 2023
Mazda Motor Corp.
Campaign: 11510423 Other
Mar 6, 2023
Defect Description:

SEATS

Potential Consequences:

The contact owns a 2016 Mazda Mazda6. The contact stated that the driver’s seat was previously moved backward; however, when her daughter attempted to move the seat forward to drive the vehicle, the seat remained stuck in the rearward position. The vehicle was taken to an unknown dealer, who informed the contact that the wire connecting the seat motor to the seat track had fractured. The dealer informed the contact that the entire seat assembly needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 85,000.

Corrective Action:

The contact owns a 2016 Mazda Mazda6. The contact stated that the driver’s seat was previously moved backward; however, when her daughter attempted to move the seat forward to drive the vehicle, the seat remained stuck in the rearward position. The vehicle was taken to an unknown dealer, who informed the contact that the wire connecting the seat motor to the seat track had fractured. The dealer informed the contact that the entire seat assembly needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 85,000.

Additional Notes:

The contact owns a 2016 Mazda Mazda6. The contact stated that the driver’s seat was previously moved backward; however, when her daughter attempted to move the seat forward to drive the vehicle, the seat remained stuck in the rearward position. The vehicle was taken to an unknown dealer, who informed the contact that the wire connecting the seat motor to the seat track had fractured. The dealer informed the contact that the entire seat assembly needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 85,000.

Manufacturer: MAZDA
Mfg Campaign: 11510423
Notice Date: Mar 6, 2023
Recall Date: Mar 6, 2023
Mazda Motor Corp.
Campaign: 11494079 Other
Nov 18, 2022
Defect Description:

PARKING BRAKE

Potential Consequences:

The contact owns a 2016 Mazda Mazda6. The contact stated that upon starting the vehicle and shifting into drive(D) or reverse(R), the vehicle failed to move. The electronic parking brake warning light was illuminated. The contact stated that he turned off and restarted the vehicle, deactivated the electronic parking brake, and forcefully depressed the accelerator pedal; however, the failure persisted. The dealer was notified of the failure and informed the contact that he had to pay to repair the vehicle since the VIN was not included in NHTSA Campaign Number: 17V393000 (Parking Brake). The vehicle was not diagnosed or repaired. The contact was in the process of towing the vehicle to the dealer. The manufacturer was notified of the failure and informed the contact that they could not assist as the VIN was not included in the recall. A case was filed. The failure mileage was approximately 75,000. The contact has noted that this complaint has been resolved.

Corrective Action:

The contact owns a 2016 Mazda Mazda6. The contact stated that upon starting the vehicle and shifting into drive(D) or reverse(R), the vehicle failed to move. The electronic parking brake warning light was illuminated. The contact stated that he turned off and restarted the vehicle, deactivated the electronic parking brake, and forcefully depressed the accelerator pedal; however, the failure persisted. The dealer was notified of the failure and informed the contact that he had to pay to repair the vehicle since the VIN was not included in NHTSA Campaign Number: 17V393000 (Parking Brake). The vehicle was not diagnosed or repaired. The contact was in the process of towing the vehicle to the dealer. The manufacturer was notified of the failure and informed the contact that they could not assist as the VIN was not included in the recall. A case was filed. The failure mileage was approximately 75,000. The contact has noted that this complaint has been resolved.

Additional Notes:

The contact owns a 2016 Mazda Mazda6. The contact stated that upon starting the vehicle and shifting into drive(D) or reverse(R), the vehicle failed to move. The electronic parking brake warning light was illuminated. The contact stated that he turned off and restarted the vehicle, deactivated the electronic parking brake, and forcefully depressed the accelerator pedal; however, the failure persisted. The dealer was notified of the failure and informed the contact that he had to pay to repair the vehicle since the VIN was not included in NHTSA Campaign Number: 17V393000 (Parking Brake). The vehicle was not diagnosed or repaired. The contact was in the process of towing the vehicle to the dealer. The manufacturer was notified of the failure and informed the contact that they could not assist as the VIN was not included in the recall. A case was filed. The failure mileage was approximately 75,000. The contact has noted that this complaint has been resolved.

Manufacturer: MAZDA
Mfg Campaign: 11494079
Notice Date: Nov 18, 2022
Recall Date: Nov 18, 2022

Need Legal Help?

Featured Attorneys
Barry Edzant

Edzant Price LLC

Valencia, CA • 36 yrs

Focus: Lemon Law, Personal Injury

Recent Articles
Jeep Grand Cherokee Head Restraint Problem

Chrysler (FCA US, LLC) has announced a safety issue affecting certain 2023–2024 Jeep Grand Ch ...

Aug 1, 2025
Fuel Injector Problem: 2021-2024 Ford Bronco Sport and 2020-2022 Ford Escape

If you own a 2021-2024 Ford Bronco Sport or 2020-2022 Ford Escape equipped with a 1.5L Dragon GTDI e ...

Jul 28, 2025
Airbag Problem Affects 2022-2025 Chrysler Pacifica and Voyager Vehicles

If you own a Chrysler Pacifica or Voyager, your vehicle may be equipped with defective side curtain ...

Jul 24, 2025